On Sat, Jan 16, 2016 at 5:22 PM, Andrew <ni...@seti.kr.ua> wrote: > Difference of *-serial images - 1) 'console=ttyS0,115200n8' in kernel > cmdline and 2) configdb.lrp with preconfigured shell on serial port. > > Try to load x86_64 with console=ttyS0,115200n8 specified. >
That's what I tried. I used the following append line in syslinux.cfg: APPEND reboot=bios usb_wait=3 console=ttyS0,115200n8 VERBOSE=1 intel_idle.max_cstate=0 processor.max_cstate=1 but I hangs too. > 16.01.2016 18:14, Sven Kirmess пишет: > > I didn't try the x86_64 first because there's no serial version of it. > I've > > created a stick from Bering-uClibc_5.2.3_x86_64_syslinux_vga.tar.gz and > > replaced the /syslinux/syslinux.cfg file with the one from > > Bering-uClibc_5.2.3_i686_syslinux_serial115200.tar.gz. And I removed the > > quiet kernel option. > > > >> SERIAL 0 115200 > >> DISPLAY syslinux.dpy > >> TIMEOUT 0 > >> APPEND reboot=bios usb_wait=3 console=ttyS0,115200n8 VERBOSE=1 > > intel_idle.max_cstate=0 processor.max_cstate=1 > >> DEFAULT /syslinux/linux initrd=/initrd.lrp,/initmod.lrp rw > root=/dev/ram0 > > LEAFCFG=/dev/sda1:vfat > > > > That hangs too after the "Loading /initmod.lrp...Loading > > /initmod.lrp...okok" line. > > > > > > SeaBIOS (version rel-1.8.0-190-gc029eab-20151109_141843-wim-ws) > > XHCI init on dev 00:10.0: regs @ 0xfeb22000, 4 ports, 32 slots, 32 byte > > contexts > > XHCI extcap 0x1 @ feb22500 > > XHCI protocol USB 3.00, 2 ports (offset 1), def 0 > > XHCI protocol USB 2.00, 2 ports (offset 3), def 10 > > XHCI extcap 0xa @ feb22540 > > Found 2 serial ports > > ATA controller 1 at 4010/4020/0 (irq 0 dev 88) > > EHCI init on dev 00:13.0 (regs=0xfeb25420) > > ATA controller 2 at 4018/4024/0 (irq 0 dev 88) > > Searching bootorder for: /pci@i0cf8/*@14,7 > > Searching bootorder for: /rom@img/memtest > > Searching bootorder for: /rom@img/setup > > XHCI port #4: 0x00200e03, powered, enabled, pls 0, speed 3 [High] > > Searching bootorder for: /pci@i0cf8/usb@10/storage@4/*@0/*@0,0 > > Searching bootorder for: /pci@i0cf8/usb@10/usb-*@4 > > USB MSC vendor='' product='USB DISK 2.0' rev='PMAP' type=0 removable=1 > > Initialized USB HUB (0 ports used) > > USB MSC blksize=512 sectors=30291264 > > All threads complete. > > Scan for option roms > > PCengines Press F10 key now for boot menu: > > Searching bootorder for: HALT > > drive 0x000f2dc0: PCHS=0/0/0 translation=lba LCHS=1024/255/63 s=30291264 > > Space available for UMB: c1000-ef000, f0000-f2dc0 > > Returned 258048 bytes of ZoneHigh > > e820 map has 7 items: > > 0: 0000000000000000 - 000000000009f800 = 1 RAM > > 1: 000000000009f800 - 00000000000a0000 = 2 RESERVED > > 2: 00000000000f0000 - 0000000000100000 = 2 RESERVED > > 3: 0000000000100000 - 00000000dffad000 = 1 RAM > > 4: 00000000dffad000 - 00000000e0000000 = 2 RESERVED > > 5: 00000000f8000000 - 00000000fc000000 = 2 RESERVED > > 6: 0000000100000000 - 000000011f000000 = 1 RAM > > enter handle_19: > > NULL > > Booting from Hard Disk... > > Booting from 0000:7c00 > > > > SYSLINUX 6.03 EDD 2014-10-06 Copyright (C) 1994-2014 H. Peter Anvin et al > > > > SYSLINUX 6.03 2014-10-06 Copyright (C) 1994-2014 H. Peter Anvin et al > > > > - -#- - > > ############################### Bering-uClibc Firewall > > # # ################# (5.2.3 - 2015-12-30) > > # # ################# (uClibc 0.9.33.2 Bering-uClibc > team) > > # # ##### Bering ### This image brought to you by: > > # # ################# > > # ##### ################# The LEAF project: > > # ################# http://leaf.sourceforge.net > > ############################### > > ################# ##### # The Shorewall project: > > ################ # # # http://www.shorewall.net > > ################ ##### # > > ############### # # > > ############## # ## > > ############ ## > > --#############-- > > - > > Loading /syslinux/linux... Loading /syslinux/linux... okok > > > > Loading /initrd.lrp...Loading /initrd.lrp...okok > > > > Loading /initmod.lrp...Loading /initmod.lrp...okok > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ▒ > > > > > > > > On Sat, Jan 16, 2016 at 4:37 PM, Andrew <ni...@seti.kr.ua> wrote: > > > >> 16.01.2016 16:48, Sven Kirmess пишет: > >>> I don't succeed booting Bering on my APU2B4. < > >> http://pcengines.ch/apu2b4.htm > >>> First I tried the > Bering-uClibc_5.2.3_geode_syslinux_serial115200.tar.gz > >>> image and got the following error message: > >>> > >>> This kernel requires the following features not present on the CPU: > >>> 3dnow > >>> > >>> Is that expected? Isn't the geode image the correct one for this board? > >> Yes, this board has non-Geode CPU. It has fresh 64bit Jaguar-cores AMD > >> CPU. So you can use generic x86_64 or i686 - which has better throughput > >> on this board (IMHO on IPv4 there'll be no significant difference or > >> even i686 may be faster due to less RAM footprint; on IPv6 x86_64 will > >> be better). > >> > >>> With the Bering-uClibc_5.2.3_i686_syslinux_serial115200.tar.gz image it > >>> hangs after "Loading /initmod.lrp...Loading /initmod.lrp...okok" > >> Can you look for kernel parameters in syslinux? It seems like kernel > >> doesn't use serial console (or hangs before console initialization). > >> > >> > >> > >> > ------------------------------------------------------------------------------ > >> Site24x7 APM Insight: Get Deep Visibility into Application Performance > >> APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month > >> Monitor end-to-end web transactions and take corrective actions now > >> Troubleshoot faster and improve end-user experience. Signup Now! > >> http://pubads.g.doubleclick.net/gampad/clk?id=267308311&iu=/4140 > >> ------------------------------------------------------------------------ > >> leaf-user mailing list: leaf-user@lists.sourceforge.net > >> https://lists.sourceforge.net/lists/listinfo/leaf-user > >> Support Request -- http://leaf-project.org/ > >> > > > ------------------------------------------------------------------------------ > > Site24x7 APM Insight: Get Deep Visibility into Application Performance > > APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month > > Monitor end-to-end web transactions and take corrective actions now > > Troubleshoot faster and improve end-user experience. Signup Now! > > http://pubads.g.doubleclick.net/gampad/clk?id=267308311&iu=/4140 > > ------------------------------------------------------------------------ > > leaf-user mailing list: leaf-user@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/leaf-user > > Support Request -- http://leaf-project.org/ > > > > ------------------------------------------------------------------------------ > Site24x7 APM Insight: Get Deep Visibility into Application Performance > APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month > Monitor end-to-end web transactions and take corrective actions now > Troubleshoot faster and improve end-user experience. Signup Now! > http://pubads.g.doubleclick.net/gampad/clk?id=267308311&iu=/4140 > ------------------------------------------------------------------------ > leaf-user mailing list: leaf-user@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/leaf-user > Support Request -- http://leaf-project.org/ > ------------------------------------------------------------------------------ Site24x7 APM Insight: Get Deep Visibility into Application Performance APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month Monitor end-to-end web transactions and take corrective actions now Troubleshoot faster and improve end-user experience. Signup Now! http://pubads.g.doubleclick.net/gampad/clk?id=267308311&iu=/4140 ------------------------------------------------------------------------ leaf-user mailing list: leaf-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/leaf-user Support Request -- http://leaf-project.org/
