Forgive me if these seems like a trivial question but here goes: I'm working for a company that provideds High Speed Wireless internet for Hotel Guests. We are trying to find a good ACCESS point to use for our system. I came across WISP-DIST a while back and thought we might try it out. Here is the problem I am experiencing: I have several brands of wireless cards I test our software with. 1) I setup the WISP-DIST on a system using a PCI-PCMCIA adapter card. 2) I'm using a Intersil Prism wireless card with the FCC ID: PD5LMWP100 3) I setup the WISP-DIST to run in HostAP (Master) mode. 4) I scan for the network using my Laptop and an Orinoco (5v) PC Card
?) I can see the TEST network under site monitor but when I setup a Profile to connect it doesn't connect to it. ?) If I use another Intersil Prism wireless card (Same model as above) I can connect the the network. ?) When I look in the WStatistics screen and select APLIST I see the other card as an "AP"?? Should it not be a client? If we decided to go with the WISP-DIST, we would like for every guest who comes into the hotel with an 802.11b wireless card to be able to access the system. Is this possible, or must every guest use an Intersil PC Card? Thanks again, Ryan Lindeman ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ leaf-wisp-dist mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-wisp-dist
