Have you enabled dhcrelay? Its in the directory /etc/init.d. To start it at boot, uncomment the 8th line. The 8th line should look like this:
RCDLINKS="2,S97 3,S97 4,K15 6,K15" You also need to specify the ip of the dhcp server in the 11th line, which should end up looking something like the following: MASTER_DHCP_SERVER="199.204.126.254" The above setup works for me on a Soekris 4521. Have you been able to get layer 2 bridging working? I have problems there. Ray On 22 Feb 2004 at 23:45, Gerry Weaver wrote: > > Hello All, > > I'm trying to set up wisp-dist on 2 Soekris boxes as a backhaul. I need to > pass DHCP thru the backhaul link. I know that DHCP is not supported on layer 3 > bridging and I can't use layer 2 on a CPE. Does anyone have any > recommendations on the best config for this case. > > Thanks in advance, > Gerry > --- > Outgoing mail is certified Virus Free. > Checked by AVG anti-virus system (http://www.grisoft.com). > Version: 6.0.576 / Virus Database: 365 - Release Date: 1/30/2004 > > > > ------------------------------------------------------- > SF.Net is sponsored by: Speed Start Your Linux Apps Now. > Build and deploy apps & Web services for Linux with > a free DVD software kit from IBM. Click Now! > http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click > _______________________________________________ > leaf-wisp-dist mailing list > [EMAIL PROTECTED] > https://lists.sourceforge.net/lists/listinfo/leaf-wisp-dist ------------------------------------------------------- SF.Net is sponsored by: Speed Start Your Linux Apps Now. Build and deploy apps & Web services for Linux with a free DVD software kit from IBM. Click Now! http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click _______________________________________________ leaf-wisp-dist mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-wisp-dist
