Hi, I've been having a lot of routing problems with wisp-dist lately, so I tried to setup a very simple config. I set up a Cisco router and a wisp-dist cpe with the following I've got both wired and wireless access to the 67.65.229.0 network.
# ip route 192.168.1.0/24 dev eth0 proto kernel scope link src 192.168.1.254 67.65.229.0/24 dev netcs0 proto kernel scope link src 67.65.229.11 default via 67.65.229.254 dev netcs0 client-pc <==> wisp-cpe <==> AirPointPro <==> router I can ping everything from the wisp-dist box itself and only the cpe(192.168.1.254) from the client pc. This config worked fine on the Cisco, but does not work on the wisp-dist box. Is there something that I'm missing on Linux / wisp-dist? Thanks, Gerry --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.576 / Virus Database: 365 - Release Date: 1/30/2004 ------------------------------------------------------- This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click _______________________________________________ leaf-wisp-dist mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-wisp-dist
