The remote building setup will be a 4511 with 2 ehter ports and 1 nl-2511 prism based card. This wireless card will be in ad-hoc mode to talk back to the main unit above. Same essid.
The main network is setup with the following: 192.168.25.0/24. My gateway to the Internet is 192.168.25.254. The ether0 port on the 4521 is 192.168.25.250/24. I want to use the same addressing in the remote building. 192.168.25.251 for 4511 and 192.168.25.101 and 102 for workstations.
My questions:
Do I need to bridge the either0 port with the wireless port on both ends??
Do I need to turn on any routing to enable the sides to talk to each other??
What would the default gateway need to be set at on both ends.. I am assuming the same as what my main router is..192.168.25.254??
I have been messing with this for awhile and can get a wonderful AP created and with the antenna I am using I am able to travel down the street and still pick up the AP and surf but this doesn't get it in the building.
Thanks Randy
------------------------------------------------------- SF.Net email is sponsored by Shop4tech.com-Lowest price on Blank Media 100pk Sonic DVD-R 4x for only $29 -100pk Sonic DVD+R for only $33 Save 50% off Retail on Ink & Toner - Free Shipping and Free Gift. http://www.shop4tech.com/z/Inkjet_Cartridges/9_108_r285 _______________________________________________ leaf-wisp-dist mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-wisp-dist
