It shows it on top of the main menu.
On Fri, 2006-02-24 at 13:23 -0500, [EMAIL PROTECTED] wrote:
> May I ask a "stupid" question?... When you ssh into the CPE, how can I
> tell which version/patch the software is?
>
> Thanks,
>
> Boatner
>
>
> > That was the answer, Hooray! (i'm a dummy). I saved a partition with
> > all my downloaded tar files and directory trees so it would not have to
> > be downloaded again. Apparently I also kept the binary: tla, which was
> > compiled on my original RH9.
> >
> > Sorry for the false alarm. I appreciate all your selfless work,
> > Vladimir.
> >
> > With my kindest regards,
> >
> > Boatner Howell
> >
> >
> >
> >
> >> Ah! I found the problem... build.sh does not know where tla is (for
> >> that matter, I don't know right now either :-\ )
> >>
> >> I'll fix that problem and let you know if that works.
> >>
> >> -Boatner
> >>
> >>
> >>
> >>> [EMAIL PROTECTED] wdist]# ls -w1
> >>> \{arch\}/wisp-dist/wisp-dist/wisp-dist--1.3/[EMAIL PROTECTED]/patch-log
> >>> | sed s/patch-// | sort -n | tail -n 1
> >>> 36
> >>> [EMAIL PROTECTED] wdist]# ls -w1
> >>> \{arch\}/wisp-dist/wisp-dist/wisp-dist--1.3/[EMAIL PROTECTED]/patch-log
> >>> | sed s/patch-// | sort -n
> >>> base-0
> >>> 1
> >>> 2
> >>> 3
> >>> 4
> >>> 5
> >>> 6
> >>> 7
> >>> 8
> >>> 9
> >>> 10
> >>> 11
> >>> 12
> >>> 13
> >>> 14
> >>> 15
> >>> 16
> >>> 17
> >>> 18
> >>> 19
> >>> 20
> >>> 21
> >>> 22
> >>> 23
> >>> 24
> >>> 25
> >>> 26
> >>> 27
> >>> 28
> >>> 29
> >>> 30
> >>> 31
> >>> 32
> >>> 33
> >>> 34
> >>> 35
> >>> 36
> >>>
> >>>>
> >>>> Actually do the following commands
> >>>>
> >>>> ls -w1 \{arch
> >>>> \}/wisp-dist/wisp-dist/wisp-dist--1.3/[EMAIL PROTECTED]/patch-log
> >>>> | sed s/patch-// | sort -n | tail -n 1
> >>>>
> >>>> ls -w1 \{arch
> >>>> \}/wisp-dist/wisp-dist/wisp-dist--1.3/[EMAIL PROTECTED]/patch-log
> >>>> | sed s/patch-// | sort -n
> >>>>
> >>>> These commands are used to find out tree version. For some reason in
> >>>> your case it thinks that it is on patchlevel 1.
> >>>>
> >>>> On Thu, 2006-02-23 at 14:12 -0500, Michael Plourde wrote:
> >>>>> i got the same problem:
> >>>>> > > the images I built would not completely boot. It would stop at
> >>>>> Init Level:.
> >>>>> except that my image is wisp-dist_1.3.1p36_img.bin
> >>>>> and before Init Level: i got
> >>>>> echo: need libc.so.6 (GLIBC2.3)
> >>>>>
> >>>>>
> >>>>> i try like Valdimir said:
> >>>>> > Go to source root directory and run
> >>>>> >
> >>>>> > ls -w1
> >>>>> >
> >>>>> \{arch}/wisp-dist/wisp-dist/wisp-dist--1.3/[EMAIL PROTECTED]
> >>>>> 003/patch-log | sed s/patch-//
> >>>>> >
> >>>>> > What would be the output?
> >>>>> and the output is:
> >>>>> base-0
> >>>>> 1
> >>>>> 10
> >>>>> 11
> >>>>> 12
> >>>>> 13
> >>>>> 14
> >>>>> 15
> >>>>> 16
> >>>>> 17
> >>>>> 18
> >>>>> 19
> >>>>> 2
> >>>>> 20
> >>>>> 21
> >>>>> 22
> >>>>> 23
> >>>>> 24
> >>>>> 25
> >>>>> 26
> >>>>> 27
> >>>>> 28
> >>>>> 29
> >>>>> 3
> >>>>> 30
> >>>>> 31
> >>>>> 32
> >>>>> 33
> >>>>> 34
> >>>>> 35
> >>>>> 36
> >>>>> 4
> >>>>> 5
> >>>>> 6
> >>>>> 7
> >>>>> 8
> >>>>> 9
> >>>>> -------------------------------------------------------------------
> >>>>>
> >>>>> What does it mean ?
> >>>>> What is my problem ?
> >>>>>
> >>>>> ----- Original Message -----
> >>>>> From: "Vladimir Ivashchenko" <[EMAIL PROTECTED]>
> >>>>> To: <[EMAIL PROTECTED]>
> >>>>> Cc: <leaf-wisp-dist@lists.sourceforge.net>
> >>>>> Sent: Thursday, February 23, 2006 11:47 AM
> >>>>> Subject: Re: [leaf-wisp] Problem building image... weird
> >>>>>
> >>>>>
> >>>>> >
> >>>>> > Probably get_patchlevel() function does not return correct
> >>>>> information for some reason.
> >>>>> >
> >>>>> > Go to source root directory and run
> >>>>> >
> >>>>> > ls -w1
> >>>>> >
> >>>>> \{arch}/wisp-dist/wisp-dist/wisp-dist--1.3/[EMAIL PROTECTED]
> >>>>> 003/patch-log | sed s/patch-//
> >>>>> >
> >>>>> > What would be the output?
> >>>>> >
> >>>>> > On Thu, 2006-02-23 at 11:40 -0500, [EMAIL PROTECTED] wrote:
> >>>>> > > I have had the same problem building images from RH9; not
> >>>>> exactly
> >>>>> true...
> >>>>> > > the images I built would not completely boot. It would stop at
> >>>>> Init Level:.
> >>>>> > >
> >>>>> > > I switched to RedHat 7.3 and the images built with ./build.sh
> >>>>> -f
> >>>>> work.
> >>>>> > >
> >>>>> > > However, none of the images built would contain the name of the
> >>>>> latest release. Example of my last build after uping my kernel to
> >>>>> 2.4.25:
> >>>>> > >
> >>>>> > > (the same result with 7.3's original kernel)
> >>>>> > >
> >>>>> > > mkfs.msdos 2.8 (28 Feb 2001)
> >>>>> > > Preparing root ... lrp md5 cramfs
> >>>>> > > Preparing local ... lrp md5
> >>>>> > > Preparing zebra ... lrp md5 cramfs
> >>>>> > > Preparing net-snmp ... lrp md5 cramfs
> >>>>> > > Preparing sshd ... lrp md5 cramfs
> >>>>> > > Preparing netdiag ... lrp md5 cramfs
> >>>>> > > adding: initrd.lrp (deflated 0%)
> >>>>> > > adding: ldlinux.sys (deflated 21%)
> >>>>> > > adding: linux (deflated 1%)
> >>>>> > > adding: local.lrp (stored 0%)
> >>>>> > > adding: local.md5 (deflated 44%)
> >>>>> > > adding: netdiag.cfs (deflated 0%)
> >>>>> > > adding: netdiag.lrp (stored 0%)
> >>>>> > > adding: netdiag.md5 (deflated 38%)
> >>>>> > > adding: net-snmp.cfs (deflated 1%)
> >>>>> > > adding: net-snmp.lrp (stored 0%)
> >>>>> > > adding: net-snmp.md5 (deflated 46%)
> >>>>> > > adding: readme (stored 0%)
> >>>>> > > adding: root.cfs (deflated 0%)
> >>>>> > > adding: root.lrp (deflated 0%)
> >>>>> > > adding: root.md5 (deflated 49%)
> >>>>> > > adding: sshd.cfs (deflated 1%)
> >>>>> > > adding: sshd.lrp (deflated 1%)
> >>>>> > > adding: sshd.md5 (deflated 37%)
> >>>>> > > adding: syslinux.cfg (deflated 28%)
> >>>>> > > adding: syslinux.dpy (stored 0%)
> >>>>> > > adding: zebra.cfs (deflated 1%)
> >>>>> > > adding: zebra.lrp (stored 0%)
> >>>>> > > adding: zebra.md5 (deflated 44%)
> >>>>> > > == Build complete. Boot image can be found at
> >>>>> > > '/usr/src/wisp-dist/wisp-dist_1.3.1p_img.bin'.
> >>>>> > >
> >>>>> > > Both files created:
> >>>>> > >
> >>>>> > > wisp-dist_1.3.1p_img.bin
> >>>>> > > wisp-dist_1.3.1p_pkg.zip
> >>>>> > >
> >>>>> > > Question: What happened to: wisp.1.3.1p35 ?
> >>>>> > >
> >>>>> > > PLease help... what could I have done wrong?
> >>>>> > >
> >>>>> > >
> >>>>> > >
> >>>>> > >
> >>>>> > >
> >>>>> > > -------------------------------------------------------
> >>>>> > > This SF.Net email is sponsored by xPML, a groundbreaking
> >>>>> scripting
> >>>>> language
> >>>>> > > that extends applications into web and mobile media. Attend the
> >>>>> live
> >>>>> webcast
> >>>>> > > and join the prime developer group breaking into this new
> >>>>> coding
> >>>>> territory!
> >>>>> > > http://sel.as-us.falkag.net/sel?cmd=lnk&kid=110944&bid=241720&dat=121642
> >>>>> _______________________________________________
> >>>>> > > leaf-wisp-dist mailing list
> >>>>> > > leaf-wisp-dist@lists.sourceforge.net
> >>>>> > > https://lists.sourceforge.net/lists/listinfo/leaf-wisp-dist
> >>>>> > --
> >>>>> > Best Regards,
> >>>>> > Vladimir Ivashchenko
> >>>>> > Chief Technology Officer
> >>>>> > Thunderworx Cyprus - www.thunderworx.com
> >>>>> >
> >>>>> >
> >>>>> >
> >>>>> > -------------------------------------------------------
> >>>>> > This SF.Net email is sponsored by xPML, a groundbreaking
> >>>>> scripting
> >>>>> language
> >>>>> > that extends applications into web and mobile media. Attend the
> >>>>> live
> >>>>> webcast
> >>>>> > and join the prime developer group breaking into this new coding
> >>>>> territory!
> >>>>> > http://sel.as-us.falkag.net/sel?cmd=lnk&kid=110944&bid=241720&dat=121642
> >>>>> _______________________________________________
> >>>>> > leaf-wisp-dist mailing list
> >>>>> > leaf-wisp-dist@lists.sourceforge.net
> >>>>> > https://lists.sourceforge.net/lists/listinfo/leaf-wisp-dist
> >>>>> >
> >>>> --
> >>>> Best Regards,
> >>>> Vladimir Ivashchenko
> >>>> Chief Technology Officer
> >>>> Thunderworx Cyprus - www.thunderworx.com
> >>>>
> >>>>
> >>>>
> >>>> -------------------------------------------------------
> >>>> This SF.Net email is sponsored by xPML, a groundbreaking scripting
> >>>> language that extends applications into web and mobile media. Attend
> >>>> the live webcast and join the prime developer group breaking into
> >>>> this new coding territory!
> >>>> http://sel.as-us.falkag.net/sel?cmd=lnk&kid=110944&bid=241720&dat=121642
> >>>> _______________________________________________
> >>>> leaf-wisp-dist mailing list
> >>>> leaf-wisp-dist@lists.sourceforge.net
> >>>> https://lists.sourceforge.net/lists/listinfo/leaf-wisp-dist
> >>
> >>
> >>
> >>
> >>
> >> -------------------------------------------------------
> >> This SF.Net email is sponsored by xPML, a groundbreaking scripting
> >> language that extends applications into web and mobile media. Attend
> >> the live webcast and join the prime developer group breaking into this
> >> new coding territory!
> >> http://sel.as-us.falkag.net/sel?cmd=lnk&kid=110944&bid=241720&dat=121642
> >> _______________________________________________
> >> leaf-wisp-dist mailing list
> >> leaf-wisp-dist@lists.sourceforge.net
> >> https://lists.sourceforge.net/lists/listinfo/leaf-wisp-dist
> >
> >
> >
> >
> >
> > -------------------------------------------------------
> > This SF.Net email is sponsored by xPML, a groundbreaking scripting
> > language that extends applications into web and mobile media. Attend the
> > live webcast and join the prime developer group breaking into this new
> > coding territory!
> > http://sel.as-us.falkag.net/sel?cmd=lnk&kid=110944&bid=241720&dat=121642
> > _______________________________________________
> > leaf-wisp-dist mailing list
> > leaf-wisp-dist@lists.sourceforge.net
> > https://lists.sourceforge.net/lists/listinfo/leaf-wisp-dist
>
>
--
Best Regards,
Vladimir Ivashchenko
Chief Technology Officer
Thunderworx Cyprus - www.thunderworx.com
-------------------------------------------------------
This SF.Net email is sponsored by xPML, a groundbreaking scripting language
that extends applications into web and mobile media. Attend the live webcast
and join the prime developer group breaking into this new coding territory!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=110944&bid=241720&dat=121642
_______________________________________________
leaf-wisp-dist mailing list
leaf-wisp-dist@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/leaf-wisp-dist
