Hi, patch does not apply. please go here
--> http://patchwork.ozlabs.org/patch/636150/ click on "download mbox" and you will see that it is line wrapped at 80 characters. John On 16/06/2016 02:37, Drew from NixCore wrote: > Added NixCore X1 ramips target http://nixcores.com. This builds 8M and > 16M images. V5 updates the patch to work with the latest source.git > > Signed-off-by: Drew Gaylo <drew at nixcores.com> > diff --git a/target/linux/ramips/base-files/etc/board.d/02_network > b/target/linux/ramips/base-files/etc/board.d/02_network > index be1912a..ebcf619 100755 > --- a/target/linux/ramips/base-files/etc/board.d/02_network > +++ b/target/linux/ramips/base-files/etc/board.d/02_network > @@ -77,6 +77,7 @@ ramips_setup_interfaces() > mt7628|\ > mzk-750dhp|\ > mzk-w300nh2|\ > + nixcore|\ > oy-0001|\ > pbr-m1|\ > psg1208|\ > diff --git a/target/linux/ramips/base-files/lib/ramips.sh > b/target/linux/ramips/base-files/lib/ramips.sh > index bd4f33d..340a628 100755 > --- a/target/linux/ramips/base-files/lib/ramips.sh > +++ b/target/linux/ramips/base-files/lib/ramips.sh > @@ -322,6 +322,9 @@ ramips_board_detect() { > *"NCS601W") > name="ncs601w" > ;; > + *"NixcoreX1") > + name="nixcore-x1" > + ;; > *"NW718") > name="nw718" > ;; > diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh > b/target/linux/ramips/base-files/lib/upgrade/platform.sh > index 0b3d8c7..8749c99 100755 > --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh > +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh > @@ -95,6 +95,7 @@ platform_check_image() { > mzk-w300nh2|\ > mzk-wdpr|\ > nbg-419n|\ > + nixcore|\ > nw718|\ > oy-0001|\ > pbr-m1|\ > diff --git a/target/linux/ramips/dts/NIXCOREX1-16M.dts > b/target/linux/ramips/dts/NIXCOREX1-16M.dts > new file mode 100644 > index 0000000..2ffcbb2 > --- /dev/null > +++ b/target/linux/ramips/dts/NIXCOREX1-16M.dts > @@ -0,0 +1,95 @@ > +/dts-v1/; > + > +/include/ "rt5350.dtsi" > + > +/ { > + compatible = "NixcoreX1", "ralink,rt5350-soc"; > + model = "NixcoreX1"; > + > + chosen{ > + bootargs = "console=ttyS1,57600"; > + }; > +}; > + > +&gpio0{ > + status = "okay"; > +}; > + > +&gpio1{ > + status = "okay"; > +}; > + > +&i2c{ > + status = "okay"; > +}; > +&uart{ > + status = "okay"; > + /* Mix of uart and gpio */ > + reset-names = "gpio uartf"; > +}; > +&spi0{ > + status = "okay"; > + > + m25p80@0 { > + #address-cells = <1>; > + #size-cells = <1>; > + compatible = "s25fl064k"; > + reg = <0>; > + linux,modalias = "m25p80", "s25fl064k"; > + spi-max-frequency = <10000000>; > + > + partition@0 { > + label = "uboot"; > + reg = <0x0 0x30000>; > + read-only; > + }; > + > + partition@30000 { > + label = "uboot-env"; > + reg = <0x30000 0x10000>; > + read-only; > + }; > + > + factory: partition@40000 { > + label = "factory"; > + reg = <0x40000 0x10000>; > + read-only; > + }; > + > + partition@50000 { > + label = "firmware"; > + reg = <0x50000 0xfb0000>; > + }; > + }; > +}; > + > +&pinctrl { > + state_default: pinctrl0 { > + gpio { > + /* Associate the tjag, uartf and led groups with gpio */ > + ralink,group = "jtag", "led", "spi_cs1"; > + /* How do we set individual pins? */ > + ralink,function = "gpio"; > + }; > + }; > +}; > + > +ðernet { > + mtd-mac-address = <&factory 0x4>; > +}; > + > +&esw { > + ralink,portmap = <0x17>; > +}; > + > +&wmac { > + ralink,mtd-eeprom = <&factory 0>; > +}; > + > +&ehci { > + status = "okay"; > +}; > + > +&ohci { > + status = "okay"; > +}; > diff --git a/target/linux/ramips/dts/NIXCOREX1-8M.dts > b/target/linux/ramips/dts/NIXCOREX1-8M.dts > new file mode 100644 > index 0000000..ca557fd > --- /dev/null > +++ b/target/linux/ramips/dts/NIXCOREX1-8M.dts > @@ -0,0 +1,95 @@ > +/dts-v1/; > + > +/include/ "rt5350.dtsi" > + > +/ { > + compatible = "NixcoreX1", "ralink,rt5350-soc"; > + model = "NixcoreX1"; > + > + chosen{ > + bootargs = "console=ttyS1,57600"; > + }; > +}; > + > +&gpio0{ > + status = "okay"; > +}; > + > +&gpio1{ > + status = "okay"; > +}; > + > +&i2c{ > + status = "okay"; > +}; > +&uart{ > + status = "okay"; > + /* Mix of uart and gpio */ > + reset-names = "gpio uartf"; > +}; > +&spi0{ > + status = "okay"; > + > + m25p80@0 { > + #address-cells = <1>; > + #size-cells = <1>; > + compatible = "s25fl064k"; > + reg = <0>; > + linux,modalias = "m25p80", "s25fl064k"; > + spi-max-frequency = <10000000>; > + > + partition@0 { > + label = "uboot"; > + reg = <0x0 0x30000>; > + read-only; > + }; > + > + partition@30000 { > + label = "uboot-env"; > + reg = <0x30000 0x10000>; > + read-only; > + }; > + > + factory: partition@40000 { > + label = "factory"; > + reg = <0x40000 0x10000>; > + read-only; > + }; > + > + partition@50000 { > + label = "firmware"; > + reg = <0x50000 0x7b0000>; > + }; > + }; > +}; > + > +&pinctrl { > + state_default: pinctrl0 { > + gpio { > + /* Associate the tjag, uartf and led groups with gpio */ > + ralink,group = "jtag", "led", "spi_cs1"; > + /* How do we set individual pins? */ > + ralink,function = "gpio"; > + }; > + }; > +}; > + > +ðernet { > + mtd-mac-address = <&factory 0x4>; > +}; > + > +&esw { > + ralink,portmap = <0x17>; > +}; > + > +&wmac { > + ralink,mtd-eeprom = <&factory 0>; > +}; > + > +&ehci { > + status = "okay"; > +}; > + > +&ohci { > + status = "okay"; > +}; > diff --git a/target/linux/ramips/image/rt305x.mk > b/target/linux/ramips/image/rt305x.mk > index da7fc46..db12a8e 100644 > --- a/target/linux/ramips/image/rt305x.mk > +++ b/target/linux/ramips/image/rt305x.mk > @@ -100,6 +100,21 @@ define BuildFirmware/HLKRM04/initramfs > mkhilinkfw -e -i$(call imgname,$(1),$(2))-uImage.bin -o $(call > imgname,$(1),$(2))-factory.bin; > endef > > +# This is called to build the nixcore image. Build both 8MB and 16MB > +nixcore_8mb_mtd_size=8060928 > +nixcore_16mb_mtd_size=16449536 > +define BuildFirmware/NIXCOREX1/squashfs > +# Args are XXX, nixcore-mM and NIXCOREX1-xM > + $(call > BuildFirmware/CustomFlash/$(1),$(1),$(2)-8M,$(3)-8M,$(nixcore_8mb_mtd_size)) > > + $(call > BuildFirmware/CustomFlash/$(1),$(1),$(2)-16M,$(3)-16M,$(nixcore_16mb_mtd_size)) > > + # Can do somethings here after the build? > +endef > +define BuildFirmware/NIXCOREX1/initramfs > +# Args are XXXX, nixcore-mM and NIXCOREX1-xM > + $(call BuildFirmware/OF/initramfs,$(1),$(2)-8M,$(3)-8M) > + $(call BuildFirmware/OF/initramfs,$(1),$(2)-16M,$(3)-16M) > +endef > + > vocore_8mb_mtd_size=8060928 > vocore_16mb_mtd_size=16449536 > define BuildFirmware/VOCORE/squashfs > @@ -257,6 +272,7 @@ Image/Build/Profile/NBG-419N=$(call > BuildFirmware/Default4M/$(1),$(1),nbg-419n,N > Image/Build/Profile/MZKW300NH2=$(call > BuildFirmware/Edimax/$(1),$(1),mzk-w300nh2,MZK-W300NH2,$(mzkw300nh2_mtd_size),CSYS,RN52,0x50000,0xc0000) > > Image/Build/Profile/MZKWDPR=$(call > BuildFirmware/Default8M/$(1),$(1),mzk-wdpr,MZK-WDPR) > Image/Build/Profile/NCS601W=$(call > BuildFirmware/Default8M/$(1),$(1),ncs601W,NCS601W) > +Image/Build/Profile/NIXCOREX1=$(call > BuildFirmware/NIXCOREX1/$(1),$(1),nixcorex1,NIXCOREX1) > nw718_mtd_size=3801088 > Image/Build/Profile/NW718=$(call > BuildFirmware/CustomFlashFactory/$(1),$(1),nw718m,NW718,$(nw718_mtd_size),ARA1B4NCRNW718;1,factory) > > Image/Build/Profile/M2M=$(call > BuildFirmware/Default8M/$(1),$(1),m2m,M2M,Linux Kernel Image) > @@ -353,6 +369,7 @@ define Image/Build/Profile/Default > $(call Image/Build/Profile/MZKWDPR,$(1)) > $(call Image/Build/Profile/NBG-419N,$(1)) > $(call Image/Build/Profile/NCS601W,$(1)) > + $(call Image/Build/Profile/NIXCOREX1,$(1)) > $(call Image/Build/Profile/NW718,$(1)) > $(call Image/Build/Profile/MINIEMBWIFI,$(1)) > $(call Image/Build/Profile/MINIEMBPLUG,$(1)) > diff --git a/target/linux/ramips/rt305x/profiles/nixcore.mk > b/target/linux/ramips/rt305x/profiles/nixcore.mk > new file mode 100644 > index 0000000..22dee9b > --- /dev/null > +++ b/target/linux/ramips/rt305x/profiles/nixcore.mk > @@ -0,0 +1,20 @@ > +# > +# Copyright (C) 2014 OpenWrt.org > +# > +# This is free software, licensed under the GNU General Public License v2. > +# See /LICENSE for more information. > +# > + > +define Profile/NIXCOREX1 > + NAME:=NixcoreX1 > + PACKAGES:=\ > + kmod-usb-core kmod-usb-ohci kmod-usb2 \ > + kmod-i2c-core kmod-i2c-ralink \ > + kmod-spi-dev > +endef > + > +define Profile/NIXCOREX1/Description > + Package set for Nixcore X1 board > +endef > + > +$(eval $(call Profile,NIXCOREX1)) > > > _______________________________________________ > Lede-dev mailing list > Lede-dev@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/lede-dev _______________________________________________ Lede-dev mailing list Lede-dev@lists.infradead.org http://lists.infradead.org/mailman/listinfo/lede-dev
