On 2016-07-13 21:23, Christian Lamparter wrote: > From: Chris Blake <chrisrblak...@gmail.com> > > This patch adds support for the Cisco Meraki MR24 Access point > to the apm821xx target. > > Board: MR24 - Meraki MR24 Cloud Managed Access Point > CPU: APM82181 SoC 800 MHz (PLB=200 OPB=100 EBC=100) > Flash size: 32MiB > RAM Size: 128MiB > Wireless: Atheros AR9380 5.0GHz + Atheros AR9380 2.4GHz > Ethernet ports: 1x Gigabit Atheros AR8035 > > WARNING: The serial port needs a TTL/RS-232 v3.3 level converter! > > For flashing instructions, visit: > <https://github.com/riptidewave93/Openwrt-MR24/blob/master/README.md#flashing> > > Signed-off-by: Chris Blake <chrisrblak...@gmail.com> > --- > target/linux/apm821xx/Makefile | 1 + > .../linux/apm821xx/base-files/etc/board.d/01_leds | 8 + > .../apm821xx/base-files/etc/board.d/02_network | 3 + > target/linux/apm821xx/base-files/etc/diag.sh | 4 + > target/linux/apm821xx/base-files/lib/apm821xx.sh | 4 + > .../lib/preinit/05_set_iface_mac_apm821xx | 14 + > .../apm821xx/base-files/lib/upgrade/merakinand.sh | 65 ++++ > .../apm821xx/base-files/lib/upgrade/platform.sh | 9 + > target/linux/apm821xx/cisco/config-default | 15 + > target/linux/apm821xx/cisco/target.mk | 11 + > target/linux/apm821xx/config-4.4 | 1 + > target/linux/apm821xx/dts/MR24.dts | 433 > +++++++++++++++++++++ > target/linux/apm821xx/image/Makefile | 81 +++- > .../002-powerpc_ibm_phy_add_ar8035.patch | 62 +++ > .../200-add-meraki-mr24-ikarem-support.patch | 31 ++ > tools/firmware-utils/src/mkmerakifw.c | 10 + > 16 files changed, 742 insertions(+), 10 deletions(-) > create mode 100644 > target/linux/apm821xx/base-files/lib/preinit/05_set_iface_mac_apm821xx > create mode 100755 target/linux/apm821xx/base-files/lib/upgrade/merakinand.sh > create mode 100644 target/linux/apm821xx/cisco/config-default > create mode 100644 target/linux/apm821xx/cisco/target.mk > create mode 100644 target/linux/apm821xx/dts/MR24.dts > create mode 100644 > target/linux/apm821xx/patches-4.4/002-powerpc_ibm_phy_add_ar8035.patch > create mode 100644 > target/linux/apm821xx/patches-4.4/200-add-meraki-mr24-ikarem-support.patch > > diff --git a/target/linux/apm821xx/Makefile b/target/linux/apm821xx/Makefile > index ba3b179..809f2f1 100644 > --- a/target/linux/apm821xx/Makefile > +++ b/target/linux/apm821xx/Makefile > @@ -11,6 +11,7 @@ CPU_TYPE:=464fp > FEATURES:=fpu dt gpio > MAINTAINER:=Chris Blake <chrisrblak...@gmail.com>, \ > Christian Lamparter <chunk...@gmail.com> > +SUBTARGETS:=cisco > > KERNEL_PATCHVER:=4.4 > Having one subtarget per device is overkill. Is there any reason why you cannot support all devices from the same target without having subtargets at all?
- Felix _______________________________________________ Lede-dev mailing list Lede-dev@lists.infradead.org http://lists.infradead.org/mailman/listinfo/lede-dev
