According to the author of the cpu temp driver, not all xrx200 boards have a cpu temperature sensor. For that reason enable the sensor only for tested boards.
Signed-off-by: Mathias Kresin <[email protected]> --- target/linux/lantiq/dts/BTHOMEHUBV5A.dts | 4 ++++ target/linux/lantiq/dts/TDW89X0.dtsi | 4 ++++ target/linux/lantiq/dts/VGV7510KW22.dtsi | 4 ++++ 3 files changed, 12 insertions(+) diff --git a/target/linux/lantiq/dts/BTHOMEHUBV5A.dts b/target/linux/lantiq/dts/BTHOMEHUBV5A.dts index 2013b31..fcfd8c7 100644 --- a/target/linux/lantiq/dts/BTHOMEHUBV5A.dts +++ b/target/linux/lantiq/dts/BTHOMEHUBV5A.dts @@ -22,6 +22,10 @@ reg = <0x0 0x8000000>; }; + cputemp@0 { + compatible = "lantiq,cputemp"; + }; + fpi@10000000 { localbus@0 { nand-parts@0 { diff --git a/target/linux/lantiq/dts/TDW89X0.dtsi b/target/linux/lantiq/dts/TDW89X0.dtsi index 59c678d..b3eaf73 100644 --- a/target/linux/lantiq/dts/TDW89X0.dtsi +++ b/target/linux/lantiq/dts/TDW89X0.dtsi @@ -20,6 +20,10 @@ reg = <0x0 0x4000000>; }; + cputemp@0 { + compatible = "lantiq,cputemp"; + }; + fpi@10000000 { gpio: pinmux@E100B10 { pinctrl-names = "default"; diff --git a/target/linux/lantiq/dts/VGV7510KW22.dtsi b/target/linux/lantiq/dts/VGV7510KW22.dtsi index 1abdc20..0284831 100644 --- a/target/linux/lantiq/dts/VGV7510KW22.dtsi +++ b/target/linux/lantiq/dts/VGV7510KW22.dtsi @@ -21,6 +21,10 @@ reg = <0x0 0x4000000>; }; + cputemp@0 { + compatible = "lantiq,cputemp"; + }; + fpi@10000000 { localbus@0 { nor-boot@0 { -- 2.7.4 _______________________________________________ Lede-dev mailing list [email protected] http://lists.infradead.org/mailman/listinfo/lede-dev
