Sorry, I forgot to include this stdout from running mkimage manually:
FIT description: LEDE FIT image for TEW827DRU
Created: Sat Aug 6 16:01:44 2016
Image 0 (script@0)
Description: u-boot-HTTP firmware update script
Created: Sat Aug 6 16:01:44 2016
Type: Script
Compression: uncompressed
Data Size: 93 Bytes = 0.09 kB = 0.00 MB
Hash algo: crc32
Hash value: 9641b1ca
Image 1 (ubi-image@1)
Description: UBI rootfs image
Created: Sat Aug 6 16:01:44 2016
Type: Firmware
Compression: uncompressed
Data Size: 168 Bytes = 0.16 kB = 0.00 MB
Architecture: ARM
Load Address: unavailable
Hash algo: crc32
Hash value: 374daf15
Note the "Data Size: " fields being wrong. The real Image 0 file is
200KB and Image 1 is 5.7MB.
On 08/06/2016 03:59 PM, J Mo wrote:
Hello
I am trying to get LEDE to build for a new device, and my device needs
a FIT image.
However, mkimage appears to be putting out a FIT file without the
actual data files being included. All the rest of the FIT file
formatting looks right on cursory inspection, but the data files which
were to be included are missing.
Any ideas?
My .its looks like this:
/dts-v1/;
/ {
description = "LEDE FIT image for TEW827DRU";
#address-cells = <1>;
images {
script@0 {
data =
"/home/user/proj/lede/newrouter-ledeproj-try6/target/linux/ipq806x/image/flash-tew827dru.scr";
description = "u-boot-HTTP firmware update script";
type = "script";
compression = "none";
arch = "arm";
hash@0 {
algo = "crc32";
};
};
ubi-image@1 {
data =
"/home/user/proj/lede/newrouter-ledeproj-try6/build_dir/target-arm_cortex-a15+neon-vfpv4_musl-1.1.15_eabi/linux-ipq806x/tmp/lede-ipq806x-TEW827DRU-squashfs-factory.bin";
description = "UBI rootfs image";
type = "firmware";
compression = "none";
arch = "arm";
hash@0 {
algo = "crc32";
};
};
};
};
_______________________________________________
Lede-dev mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/lede-dev
