On 2016-09-30 15:56, Felix Fietkau wrote:
On 2016-09-30 15:10, Koen Vandeputte wrote:
On 2016-09-30 15:00, Felix Fietkau wrote:
On 2016-09-30 14:57, Koen Vandeputte wrote:
On 2016-09-30 14:31, Felix Fietkau wrote:
On 2016-09-30 09:48, Koen Vandeputte wrote:
The general "uci commit" does NOT store the generated sections.
Fix this for now by storing each part separately.
I'd prefer getting the real bug fixed instead of just working around it
like this.
I totally agree, but the main intent was to have at least some temporary
solution until the real bug is fixed.
Without this temp fix, a device will regenerate the configs on each boot.
If this consequence is OK for you, then I totally agree with rejection.
I've never seen this bug in my own tests so far. What device did you
reproduce it on?
Gateworks laguna (cns3xxx)
When flashing a fresh image (not sysupgrade), no 'system' config file is
present in /etc/config
Also when you use sysupgrade -n?
yes, same behaviour
So the file gets touched (empty) and the config gets generated as
expected (confirmed with 'uci show system')
However,
- After the initial generation the 'system' file remains empty (also
when executing 'uci commit' manually afterwards)
- it only gets filled when manually executing 'uci commit system'
I can't reproduce this on my GW2391
fyi, I'm testing on gw2388-4
Can you confirm you did this:
- rm /etc/config/system
- reboot
... booting ...
- cat /etc/config/system
--> content is present?
Here is my output when doing the steps above:
[ node-3 ] cat /etc/config/system
[ node-3 ] uci show system
system.@system[0]=system
system.@system[0].hostname='lede'
system.@system[0].timezone='UTC'
system.@system[0].ttylogin='0'
system.@system[0].log_size='64'
system.@system[0].urandom_seed='0'
system.ntp=timeserver
system.ntp.enabled='1'
system.ntp.enable_server='0'
system.ntp.server='0.lede.pool.ntp.org' '1.lede.pool.ntp.org'
'2.lede.pool.ntp.org' '3.lede.pool.ntp.org'
system.@led[0]=led
system.@led[0].default='0'
system.@led[0].name='heartbeat'
system.@led[0].sysfs='user1'
system.@led[0].trigger='heartbeat'
[ node-3 ] uci commit
[ node-3 ] cat /etc/config/system
[ node-3 ] uci commit system
[ node-3 ] cat /etc/config/system
config system
option hostname 'lede'
option timezone 'UTC'
option ttylogin '0'
option log_size '64'
option urandom_seed '0'
config timeserver 'ntp'
option enabled '1'
option enable_server '0'
list server '0.lede.pool.ntp.org'
list server '1.lede.pool.ntp.org'
list server '2.lede.pool.ntp.org'
list server '3.lede.pool.ntp.org'
config led
option default '0'
option name 'heartbeat'
option sysfs 'user1'
option trigger 'heartbeat'
[ node-3 ]
- Felix
--
Koen Vandeputte - Software Developer
koen.vandepu...@ncentric.com | +32499736158
_______________________________________________
Lede-dev mailing list
Lede-dev@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/lede-dev
