I have been using openWRT CC 1505, but want to start using LEDE. I built
for the WPJ344, but didn't get pings to or from my PC.
I have a serial connection to the wpj344, so i can look at demsg without
an eth connection.
For CC, the relevent lines are (some spacing added):
[ 0.850000] 0x000000ff0000-0x000001000000 : "art"
[ 0.870000] libphy: ag71xx_mdio: probed
[ 0.870000] switch0: Atheros AR8337 rev. 2 switch registered on
[ 0.940000] libphy: ag71xx_mdio: probed
[ 1.540000] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.0:00
[uid=004dd036, driver=Atheros AR8216/AR8236/AR8316]
[ 1.550000] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:RGMII
[ 2.140000] ag71xx-mdio.1: Found an AR934X built-in switch
[ 2.180000] eth1: Atheros AG71xx at 0xba000000, irq 5, mode:GMII
[ 2.190000] TCP: cubic registered
[ 0.904631] 0x000000ff0000-0x000001000000 : "art"
[ 0.925684] libphy: ag71xx_mdio: probed
[ 0.933207] libphy: ag71xx_mdio: probed
[ 1.522084] ag71xx ag71xx.0: no PHY found with phy_mask=00000001
[ 2.112580] ag71xx-mdio.1: Found an AR934X built-in switch
[ 2.154948] eth0: Atheros AG71xx at 0xba000000, irq 5, mode:GMII
[ 2.163279] NET: Registered protocol family 10
I'll continue investigating, but has anyone else run across this? Maybe
Lede-dev mailing list