Hi. Trying Ubiquity power beam M5. According to the instructions on openwrt wiki, I'm using loco m5 firmware. All looks fine, only configuration is lost after every reboot.
Tried: openwrt-15.05.1-ar71xx-generic-ubnt-loco-m-xw-squashfs-sysupgrade.bin openwrt-15.05-ar71xx-generic-ubnt-loco-m-xw-squashfs-sysupgrade.bin openwrt-ar71xx-generic-ubnt-loco-m-xw-squashfs-sysupgrade.bin lede-ar71xx-generic-ubnt-loco-m-xw-squashfs-sysupgrade.bin All with the same result. I remember I had some similar problem in past on a different board, and I believe that there was and issue on definition of nand size. Not really sure. Any ideas? Jiri _______________________________________________ Lede-dev mailing list Lede-dev@lists.infradead.org http://lists.infradead.org/mailman/listinfo/lede-dev
