Hi, im new on lede and im a user, no dev. Hope its ok to ask. I got an archer c5 flashed to a C7 (works perfect since month with openwrt).
I stumbled over messages - and i dont no if this is also on openwrt. Looks like there are not a problem (wifi works) root@Archer-Lede:/# dmesg | grep ath10 [ 9.291627] ath10k_pci 0000:01:00.0: pci irq legacy oper_irq_mode 1 irq_mode 0 reset_mode 0 [ 9.514635] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:01:00.0.bin failed with error -2 [ 9.525521] ath10k_pci 0000:01:00.0: Falling back to user helper [ 9.617803] firmware ath10k!pre-cal-pci-0000:01:00.0.bin: firmware_loading_store: map pages failed [ 9.981761] ath10k_pci 0000:01:00.0: qca988x hw2.0 target 0x4100016c chip_id 0x043202ff sub 0000:0000 [ 9.991164] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 1 [ 10.004239] ath10k_pci 0000:01:00.0: firmware ver 10.2.4.70.54 api 5 features no-p2p,raw-mode,mfp crc32 9d340dd9 [ 10.014664] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/board-2.bin failed with error -2 [ 10.025265] ath10k_pci 0000:01:00.0: Falling back to user helper [ 10.104231] firmware ath10k!QCA988X!hw2.0!board-2.bin: firmware_loading_store: map pages failed [ 10.119436] ath10k_pci 0000:01:00.0: board_file api 1 bmi_id N/A crc32 bebc7c08 [ 11.250688] ath10k_pci 0000:01:00.0: htt-ver 2.1 wmi-op 5 htt-op 2 cal file max-sta 128 raw 0 hwcrypto 1 [ 328.294935] ath10k_pci 0000:01:00.0: DFS region 0x0 not supported, will trigger radar for every pulse root@Archer-Lede:/# Regards _______________________________________________ Lede-dev mailing list Lede-dev@lists.infradead.org http://lists.infradead.org/mailman/listinfo/lede-dev
