Hi Felix! Am 19.10.2016 um 21:43 schrieb Felix Fietkau: >>>> thanks for your comments. Please take a look: >>>> >>>> Am 18.10.2016 um 08:22 schrieb John Crispin: >>>> >>>>>> +++ b/target/linux/ipq806x/base-files/lib/preinit/04_set_mtd_ipq806x.sh >>>>>> @@ -0,0 +1,21 @@ >>>>>> +# >>>>>> +# Copyright (C) 2009 OpenWrt.org >>>>>> +# >>>>>> + >>>>>> +. /lib/ipq806x.sh >>>>>> +. /lib/functions/system.sh >>>>>> + >>>>>> +preinit_assign_mtd2block() { >>>>>> + case $(ipq806x_board_name) in >>>>>> + nbg6817) >>>>>> + echo "/dev/mmcblk0p2,64KiB,romd" > >>>>>> /sys/module/block2mtd/parameters/block2mtd >>>>>> + echo "/dev/mmcblk0p3,64KiB,header" > >>>>>> /sys/module/block2mtd/parameters/block2mtd >>>>>> + echo "/dev/mmcblk0p4,64KiB,kernel" > >>>>>> /sys/module/block2mtd/parameters/block2mtd >>>>>> + echo "/dev/mmcblk0p6,64KiB,header_1" > >>>>>> /sys/module/block2mtd/parameters/block2mtd >>>>>> + echo "/dev/mmcblk0p7,64KiB,kernel_1" > >>>>>> /sys/module/block2mtd/parameters/block2mtd >>>>>> + echo "/dev/mmcblk0p8,64KiB,rootfs_1" > >>>>>> /sys/module/block2mtd/parameters/block2mtd >>>>>> + ;; >>>>>> + esac >>>>>> +} >>>>>> + >>>>> >>>>> can this not go into the commandline inside the devicetree ? >>>> I tried, but block2mtd accepts only one mapping in the command line. >>>> >>>> I will rework the patch the next days and send an update. >>> Why do we need block2mtd at all for this target? >> >> The system uses an internal mmc for storage of root fs and other data. I saw >> that the rb532 platform also uses block2mtd for this. >> With ubi on top of it, everything including sysupgrade worked nearly out of >> the box. That's why I preferred to use existing parts. >> If you have another idea, please tell. For me it's my first mmc based >> platform. > MMC is just a block device like any other. Please take a look at octeon, > mvebu or x86 as examples of how to do it without block2mtd.
I have switched rootfs now to squashfs, that ist working. But I have problems with the overlayfs. It is on /dev/mmcblk0p1, but I do not understand how to tell the system to use this partition. I cannot find a matching example. What I did: 1) Added an fstab to the squassh image: config 'global' option anon_swap '0' option anon_mount '0' option auto_swap '1' option auto_mount '1' option delay_root '5' option check_fs '0' config 'mount' option device '/dev/mmcblk0p1' option enabled '1' option target '/overlay' option fstype 'ext4' option options 'rw,sync' option enabled_fsck 0 option is_rootfs '1' 2) label the ext4fs rootfs_data 3) added rootfs_data=/dev/mmcblk0p1 on kernel commandline. But fstools does not mount it. Please help. Kind regards, André
smime.p7s
Description: S/MIME Cryptographic Signature
_______________________________________________ Lede-dev mailing list Lede-dev@lists.infradead.org http://lists.infradead.org/mailman/listinfo/lede-dev