Hi! Am 23.10.2016 um 16:38 schrieb Felix Fietkau: > On 2016-10-23 16:25, André Valentin wrote: >> CPU: 2x1.8GHz ARM, RAM: 512MiB >> Storage: 4MiB serial Flash, 3.9GiB MMC >> NIC: 2x1GBit/s, Switch with 5 external and 2 internal ports >> WiFi: Dualband, ath10k 2.4GHz, 5GHz MU-MIMO >> >> For installation copy xx-mmcblk0p4-kernel.bin and >> xx-mmcblk0p5-rootfs-full.bin >> to device. Then run: >> cat xx-mmcblk0p4-kernel.bin > /dev/mmc0blk0p4 >> cat xx-mmcblk0p5-rootfs-full.bin > /dev/mmc0blk0p5 >> reboot -f >> >> For debugging serial console is easily visible on board, no soldering needed. >> >> Signed-off-by: André Valentin <avalen...@marcant.net> >> --- >> .../linux/ipq806x/base-files/etc/board.d/01_leds | 5 + >> .../ipq806x/base-files/etc/board.d/02_network | 7 + >> .../etc/hotplug.d/firmware/11-ath10k-caldata | 6 + >> target/linux/ipq806x/base-files/lib/ipq806x.sh | 3 + >> target/linux/ipq806x/config-4.4 | 18 +- >> .../arch/arm/boot/dts/qcom-ipq8065-nbg6817.dts | 341 >> +++++++++++++++++++++ >> target/linux/ipq806x/image/Makefile | 26 +- >> .../linux/ipq806x/patches-4.4/800-devicetree.patch | 3 +- >> 8 files changed, 401 insertions(+), 8 deletions(-) >> create mode 100644 >> target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-nbg6817.dts >> > >> diff --git a/target/linux/ipq806x/image/Makefile >> b/target/linux/ipq806x/image/Makefile >> index b74f1a7..e7d4bf2 100644 >> --- a/target/linux/ipq806x/image/Makefile >> +++ b/target/linux/ipq806x/image/Makefile >> @@ -90,6 +90,19 @@ define Device/TpSafeImage >> endef >> DEVICE_VARS += TPLINK_BOARD_NAME >> >> +define Device/ZyXELImage >> + PROFILES += $$(DEVICE_NAME) >> + FILESYSTEMS := squashfs >> + KERNEL_SUFFIX := -uImage >> + KERNEL = kernel-bin | append-dtb | uImage none | pad-to $$(KERNEL_SIZE) >> + KERNEL_NAME := zImage >> + IMAGES := sysupgrade.tar mmcblk0p5-rootfs.bin mmcblk0p5-rootfs-full.bin >> mmcblk0p4-kernel.bin >> + IMAGE/sysupgrade.tar := sysupgrade-tar >> + IMAGE/mmcblk0p5-rootfs.bin := append-rootfs | pad-rootfs | pad-to >> $$(BLOCKSIZE) >> + IMAGE/mmcblk0p5-rootfs-full.bin := append-rootfs | pad-rootfs | pad-to >> $$(ROOTFS_SIZE) > Please drop the -full.bin, it wastes space. > Change -rootfs.bin to append-rootfs | pad-extra 128k, similar to how it > is handled on the octeon target. That is enough to ensure that it > re-creates the overlay filesystem on first boot. > Change the sysupgrade.tar image to: > > IMAGE/sysupgrade.tar/squashfs := append-rootfs | pad-extra 128k | > sysupgrade-tar rootfs=$$$$@ > I would not pad more than the blocksize to the rootfs. My sysupgrade process calculates the offset for the rootfs_data. That would break.
That's why I added the full bin, for recovery cases. But I'll drop it. > > - Felix >
smime.p7s
Description: S/MIME Cryptographic Signature
_______________________________________________ Lede-dev mailing list Lede-dev@lists.infradead.org http://lists.infradead.org/mailman/listinfo/lede-dev
