On 2016-10-19 23:31, Charles wrote: > Hello, > > on a TP-Link WDR3600 v1 (dual-band wifi, ath9k, wireless settings are > attached below, most notably wireless.radioX.country=DE), the output > of command 'iw reg get' is > > with OpenWrt 15.05.1: > > country DE: DFS-ETSI > (2400 - 2483 @ 40), (N/A, 20), (N/A) > (5150 - 5250 @ 80), (N/A, 20), (N/A), NO-OUTDOOR > (5250 - 5350 @ 80), (N/A, 20), (0 ms), NO-OUTDOOR, DFS > (5470 - 5725 @ 160), (N/A, 27), (0 ms), DFS > (57000 - 66000 @ 2160), (N/A, 40), (N/A) > > and with current LEDE: > > global > country DE: DFS-ETSI > (2400 - 2483 @ 40), (N/A, 20), (N/A) > (5150 - 5250 @ 80), (N/A, 20), (N/A), NO-OUTDOOR, AUTO-BW > (5250 - 5350 @ 80), (N/A, 20), (0 ms), NO-OUTDOOR, DFS, AUTO-BW > (5470 - 5725 @ 160), (N/A, 27), (0 ms), DFS > (5725 - 5875 @ 80), (N/A, 14), (N/A) > (57000 - 66000 @ 2160), (N/A, 40), (N/A) > > phy#1 > country US: DFS-FCC > (2402 - 2472 @ 40), (N/A, 30), (N/A) > (5170 - 5250 @ 80), (N/A, 23), (N/A), AUTO-BW > (5250 - 5330 @ 80), (N/A, 23), (0 ms), DFS, AUTO-BW > (5490 - 5730 @ 160), (N/A, 23), (0 ms), DFS > (5735 - 5835 @ 80), (N/A, 30), (N/A) > (57240 - 63720 @ 2160), (N/A, 40), (N/A) > > phy#0 > country US: DFS-FCC > (2402 - 2472 @ 40), (N/A, 30), (N/A) > (5170 - 5250 @ 80), (N/A, 23), (N/A), AUTO-BW > (5250 - 5330 @ 80), (N/A, 23), (0 ms), DFS, AUTO-BW > (5490 - 5730 @ 160), (N/A, 23), (0 ms), DFS > (5735 - 5835 @ 80), (N/A, 30), (N/A) > (57240 - 63720 @ 2160), (N/A, 40), (N/A) > > global > country DE: DFS-ETSI > (2400 - 2483 @ 40), (N/A, 20), (N/A) > (5150 - 5250 @ 80), (N/A, 20), (N/A), NO-OUTDOOR, AUTO-BW > (5250 - 5350 @ 80), (N/A, 20), (0 ms), NO-OUTDOOR, DFS, AUTO-BW > (5470 - 5725 @ 160), (N/A, 27), (0 ms), DFS > (5725 - 5875 @ 80), (N/A, 14), (N/A) > (57000 - 66000 @ 2160), (N/A, 40), (N/A) > > Questions: > > 1. Why does LEDE show four regulatory domain blocks while OpenWrt shows > only one? This was added in Linux upstream. LEDE uses a newer version of mac80211.
> 2. What does the "country US: DFS-FCC" blocks tell me when radio is set > to an ETSI region country (DE) according to uci? Please try the latest version from my staging tree at: https://git.lede-project.org/?p=lede/nbd/staging.git;a=summary > 3. What does AUTO-BW mean? It means maximum channel bandwidth is determined by the available frequency range. - Felix _______________________________________________ Lede-dev mailing list Lede-dev@lists.infradead.org http://lists.infradead.org/mailman/listinfo/lede-dev
