I forgot to mention the builtin sdcard reader in the original post. On Saturday, October 22, 2016 6:10:52 PM CEST Christian Lamparter wrote: > Hello, > > On Saturday, October 22, 2016 11:22:35 AM CEST Rafał Miłecki wrote: > > From: Rafał Miłecki <ra...@milecki.pl> > > > > The old usbdev trigger never supported assigning more than 1 USB port. > > This code we got was never working as expected. Switch to usbport to > > have LED working with both ports. > > > > Signed-off-by: Rafał Miłecki <ra...@milecki.pl> > > I was testing this on the wndr4700. > > # cat /etc/config/system > config led 'led_usb3' > option name 'USB3' > option sysfs 'wndr4700:blue:usb' > option trigger 'usbport' > list port 'usb2-port1' > list port 'usb3-port1' Note: usb1-port1 is not used there. The usb1 "should always" be controlled by the dwc2-usb host and not included in this list. This is because the sd-card reader (the wndr4700 has one that's user accessible on the right hand side) is wired directly to it.
Regards, Christian [...] > # lsusb -t > /: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/2p, 5000M > |__ Port 2: Dev 3, If 0, Class=Mass Storage, Driver=usb-storage, 5000M > /: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/2p, 480M > |__ Port 1: Dev 4, If 0, Class=Mass Storage, Driver=usb-storage, 480M (ignore the following built-in sd-card reader on the dwc2 controller) > /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=dwc2/1p, 480M > |__ Port 1: Dev 2, If 0, Class=Mass Storage, Driver=usb-storage, 480M > > > cat /sys/kernel/debug/usb/devices > > T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=5000 MxCh= 2 > B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0 > D: Ver= 3.00 Cls=09(hub ) Sub=00 Prot=03 MxPS= 9 #Cfgs= 1 > P: Vendor=1d6b ProdID=0003 Rev= 4.04 > S: Manufacturer=Linux 4.4.26 xhci-hcd > S: Product=xHCI Host Controller > S: SerialNumber=0000:45:00.0 > C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA > I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub > E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms > > T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=5000 MxCh= 0 > D: Ver= 3.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 > P: Vendor=0bb4 ProdID=2910 Rev= 1.00 > S: Manufacturer=Intenso > S: Product=Slim Line > S: SerialNumber=0710562A29A29647 > C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=504mA > I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage > E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms > E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms > > T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 2 > B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0 > D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1 > P: Vendor=1d6b ProdID=0002 Rev= 4.04 > S: Manufacturer=Linux 4.4.26 xhci-hcd > S: Product=xHCI Host Controller > S: SerialNumber=0000:45:00.0 > C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA > I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub > E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms > > T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 3 Spd=480 MxCh= 0 > D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 > P: Vendor=090c ProdID=1000 Rev=11.00 > S: Manufacturer=SMI Corporation > S: Product=USB DISK > S: SerialNumber=AA04012900007610 > C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA > I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage > E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms > E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=31875us (the dwc2 controller) > T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 1 > B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0 > D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1 > P: Vendor=1d6b ProdID=0002 Rev= 4.04 > S: Manufacturer=Linux 4.4.26 dwc2_hsotg > S: Product=DWC OTG Controller > S: SerialNumber=4bff80000.usbotg > C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA > I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub > E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms (This is the SD-Card reader - it's a GL827L SD/MMC/MS Flash Card Reader and uses usb-storage class driver) > T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 > D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 > P: Vendor=05e3 ProdID=0723 Rev=94.54 > S: Manufacturer=Generic > S: Product=USB Storage > C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA > I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage > E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms > E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms _______________________________________________ Lede-dev mailing list Lede-dev@lists.infradead.org http://lists.infradead.org/mailman/listinfo/lede-dev
