I own an ar71xx bboard (GL-6416 to be exact). Whether the ethernet cable
is connected to WAN port or not, running `swconfig dev switch0 show`
returns the following:
```
Global attributes:
enable_vlan: 0
Port 0:
pvid: 0
link: port:0 link:up speed:1000baseT full-duplex txflow rxflow
Port 1:
pvid: 0
link: port:1 link:down
Port 2:
pvid: 0
link: port:2 link:down
Port 3:
pvid: 0
link: port:3 link:down
Port 4:
pvid: 0
link: port:4 link:down
VLAN 0:
vid: 0
ports: 0 1 2 3 4
```
But if I connect the cable to the LAN port, the result is:
```
Global attributes:
enable_vlan: 0
Port 0:
pvid: 0
link: port:0 link:up speed:1000baseT full-duplex txflow rxflow
Port 1:
pvid: 0
link: port:1 link:up speed:100baseT full-duplex auto
Port 2:
pvid: 0
link: port:2 link:down
Port 3:
pvid: 0
link: port:3 link:down
Port 4:
pvid: 0
link: port:4 link:down
VLAN 0:
vid: 0
ports: 0 1 2 3 4
```
Is it usual behavior? I suppose not, since my other router (mt762a)
works as expected, that is it reflects the changes for the WAN port.
_______________________________________________
Lede-dev mailing list
Lede-dev@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/lede-dev
