I'm using multiple modems config interface 'wan1' option proto 'qmi' option device '/dev/cdc-wdm0' option apn 'internet.megafon.ru' option ipv6 '0' option metric '1'
config interface 'wan2' option proto 'qmi' option device '/dev/cdc-wdm1' option apn 'internet.beeline.ru' option ipv6 '0' option metric '2' And 2 more modems And with your patch logread shows endlessly: Fri Dec 9 09:38:15 2016 daemon.notice netifd: wan3 (18612): Command failed: Permission denied Fri Dec 9 09:38:15 2016 daemon.notice netifd: Interface 'wan3' is now down Fri Dec 9 09:38:15 2016 daemon.notice netifd: Interface 'wan3' is setting up now Fri Dec 9 09:38:15 2016 daemon.notice netifd: wan4 (18611): Waiting for network registration Fri Dec 9 09:38:16 2016 daemon.notice netifd: wan4 (18611): Starting network wan4 Fri Dec 9 09:38:16 2016 daemon.notice netifd: wan3 (18625): Waiting for network registration Fri Dec 9 09:38:16 2016 daemon.notice netifd: wan4 (18611): Unable to connect IPv4 Fri Dec 9 09:38:16 2016 daemon.notice netifd: wan3 (18625): Starting network wan3 Fri Dec 9 09:38:16 2016 daemon.notice netifd: wan4 (18655): Stopping network wan4 Fri Dec 9 09:38:16 2016 daemon.notice netifd: wan4 (18655): Command failed: Permission denied About cgdcont: 1'st modem: at+cgdcont? +CGDCONT: 1,"IP","internet.megafon.ru","0.0.0.0",0,0 +CGDCONT: 3,"IP","internet.megafon.ru","0.0.0.0",0,0 2'nd modem: at+cgdcont? +CGDCONT: 1,"IP","internet.beeline.ru","0.0.0.0",0,0 +CGDCONT: 3,"IP","internet.beeline.ru","0.0.0.0",0,0 And 2 more modems Only one (wan2) gets up and connected to network. What I'm doing wrong? 2016-12-09 12:35 GMT+03:00 Matti Laakso <malaa...@elisanet.fi>: > On 09.12.2016 11:27, Petr Štetiar wrote: >> >> Matti Laakso <malaa...@elisanet.fi> [2016-12-09 10:23:24]: >> >>> I don't think that the autoconnect setting is "transferred" to the >>> network, rather it could be tied to a specific call profile index, which >>> has the wrong APN. If your Slovakian SIM card has several predefined >>> profiles, this could be the case. If your modem exposes a virtual serial >>> port which accepts AT-commands, you could use AT+CGDCONT? to check. >> >> Thanks for the additional hints. Details about my modem: >> >> ATI >> Quectel >> EC20 >> Revision: EC20EQAR02A05E2G >> >> I knew, that there's only one profile defined, operator has deleted all >> other >> profiles, there's currently only one APN defined. >> >> AT+CGDCONT? >> +CGDCONT: 1,"IPV4V6","","0.0.0.0",0,0 > > > Well, there's no APN defined (it's an empty string), and who knows, maybe > the modem ignores the APN provided via QMI when enabling autoconnect... Does > your working Czech SIM card have a valid APN string? > > Matti > > >> >>> I agree fully. That's why I added the autoconnect option in my last >>> patch and defaulted it to disabled. >> >> Great, I've missed this patch. Going to take a look at it. >> >> -- ynezz > > -- Best regards, Nikolay Ledovskikh. _______________________________________________ Lede-dev mailing list Lede-dev@lists.infradead.org http://lists.infradead.org/mailman/listinfo/lede-dev