From: Ben Greear <gree...@candelatech.com> Signed-off-by: Ben Greear <gree...@candelatech.com> ---
Build tested, but the board I was trying to test it on appears busted and does not even show an ath10k device on the bus, so not sure if this firmware actually works. package/firmware/ath10k-firmware/Makefile | 38 +++++++++++++++++++++++++++++++ 1 file changed, 38 insertions(+) diff --git a/package/firmware/ath10k-firmware/Makefile b/package/firmware/ath10k-firmware/Makefile index fa026e4..301dcbd 100644 --- a/package/firmware/ath10k-firmware/Makefile +++ b/package/firmware/ath10k-firmware/Makefile @@ -32,6 +32,11 @@ $(Package/ath10k-firmware-default) TITLE:=ath10k firmware for QCA9887 devices endef +define Package/ath10k-firmware-qca9887-ct +$(Package/ath10k-firmware-default) + TITLE:=ath10k-CT firmware for QCA9887 devices +endef + QCA9887_REV:=3cce88e245f2d685e49411c4f80998f94baf67b8 QCA9887_FIRMWARE_FILE:=firmware-5.bin_10.2.4-1.0-00013 QCA9887_FIRMWARE_FILE_HASH:=5966408bd41f309edb595344b8dd088c0fed212debfd91e5f3e8a55ea119c16d @@ -79,6 +84,13 @@ define Download/ath10k-firmware-qca988x-ct endef $(eval $(call Download,ath10k-firmware-qca988x-ct)) +QCA9887_FIRMWARE_FILE_CT:=firmware-2-ct-full-community.bin-19-rc1-lede +define Download/ath10k-firmware-qca9887-ct + $(call Download/ct-firmware,QCA9887,ath10k-9887) + HASH:=622deb6996dd70b83d9a42c742254137fbc4afcc59134f60bf8f3e97aac17c6e +endef +$(eval $(call Download,ath10k-firmware-qca9887-ct)) + QCA99X0_FIRMWARE_FILE_CT:=firmware-5-ct-full-community-9.bin-lede.001 define Download/ath10k-firmware-qca99x0-ct $(call Download/ct-firmware,QCA99X0,ath10k-10-4) @@ -107,6 +119,13 @@ $(Package/ath10k-firmware-default) CATEGORY:=Firmware endef +define Package/ath10k-firmware-qca9887-ct +$(Package/ath10k-firmware-default) + TITLE:=ath10k CT 10.1 firmware for QCA9887 devices + SECTION:=firmware + CATEGORY:=Firmware +endef + define Package/ath10k-firmware-qca988x-ct/description Alternative ath10k firmware for QCA988X from Candela Technologies. Enables IBSS and other features. See: @@ -116,6 +135,14 @@ is un-selected since the driver will try to load firmware-5.bin before firmware-2.bin endef +define Package/ath10k-firmware-qca9887-ct/description +Alternative ath10k firmware for QCA9887 from Candela Technologies. +Enables IBSS and other features. See: +http://www.candelatech.com/ath10k-10.1.php +This firmware conflicts with the standard 9887 firmware, so select only +one. +endef + define Package/ath10k-firmware-qca99x0-ct/description Alternative ath10k firmware for QCA99x0 from Candela Technologies. Enables IBSS and other features. See: @@ -224,6 +251,16 @@ define Package/ath10k-firmware-qca988x/install $(1)/lib/firmware/ath10k/QCA988X/hw2.0/firmware-5.bin endef +define Package/ath10k-firmware-qca9887-ct/install + $(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA9887/hw1.0 + $(INSTALL_DATA) \ + $(DL_DIR)/$(call CT_FIRMWARE_FILE,QCA9887) \ + $(1)/lib/firmware/ath10k/QCA9887/hw1.0/firmware-2.bin + $(INSTALL_DATA) \ + $(DL_DIR)/$(QCA9887_BOARD_FILE_DL) \ + $(1)/lib/firmware/ath10k/QCA9887/hw1.0/board.bin +endef + define Package/ath10k-firmware-qca988x-ct/install $(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA988X/hw2.0 $(INSTALL_DATA) \ @@ -297,6 +334,7 @@ $(eval $(call BuildPackage,ath10k-firmware-qca99x0)) $(eval $(call BuildPackage,ath10k-firmware-qca6174)) $(eval $(call BuildPackage,ath10k-firmware-qca9984)) +$(eval $(call BuildPackage,ath10k-firmware-qca9887-ct)) $(eval $(call BuildPackage,ath10k-firmware-qca988x-ct)) $(eval $(call BuildPackage,ath10k-firmware-qca99x0-ct)) $(eval $(call BuildPackage,ath10k-firmware-qca9984-ct)) -- 2.4.11 _______________________________________________ Lede-dev mailing list Lede-dev@lists.infradead.org http://lists.infradead.org/mailman/listinfo/lede-dev
