On 20/02/2017 19:31, Piotr Dymacz wrote:
> Hello,
>
> 2017-02-20 13:11 GMT+01:00 Conor O'Gorman <i...@conorogorman.net>:
>> On 18/02/17 14:32, Weijie Gao wrote:
>>>
>>> For AR71XX devices, GMAC1 always connects port 0 of the built-in switch,
>>> as the CPU port.
>>>
>>> This patch sets correct vlan for some devices with wrong settings:
>>> a) mark port 0 as CPU port, tagged
>>> b) reverse port order, marking these ports untagged
>>>
>> This change affects all these boards:
>> dir-615-i1|\
>> omy-g1|\
>> r6100|\
>> smart-300|\
>> tl-mr3420-v2|\
>> tl-wdr6500-v2|\
>> tl-wr841n-v8|\
>> tl-wr940n-v4|\
>> tl-wr941nd-v5|\
>> tl-wr941nd-v6|\
>> wnr1000-v2|\
>> wnr2000-v4|\
>> wnr2200|\
>> wnr612-v2|\
>> wpn824n)
>>
>> Which ones have you tested?
>
> At least for TL-WR841N v8 and TL-MR3420 v2 switch port mapping should be:
> "0@eth1" "1:lan:4" "2:lan:1" "3:lan:2" "4:lan:3"
>
> ---
> Cheers,
> Piotr
>
> _______________________________________________
> Lede-dev mailing list
> Lede-dev@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/lede-dev
>
looks like i merged this too early, i had a look at the file beforehand
and concluded that only one board was changed, apparently it was too
early. i'll revert the commit
John
_______________________________________________
Lede-dev mailing list
Lede-dev@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/lede-dev
