Signed-off-by: Stijn Tintel <[email protected]>
---
.../linux/brcm2708/base-files/etc/board.d/02_network | 6 +++---
target/linux/brcm2708/base-files/etc/diag.sh | 8 ++++----
target/linux/brcm2708/base-files/lib/brcm2708.sh | 20 ++++++++++----------
.../lib/preinit/05_set_preinit_iface_brcm2708 | 6 +++---
4 files changed, 20 insertions(+), 20 deletions(-)
diff --git a/target/linux/brcm2708/base-files/etc/board.d/02_network
b/target/linux/brcm2708/base-files/etc/board.d/02_network
index 7642c06..e554b73 100755
--- a/target/linux/brcm2708/base-files/etc/board.d/02_network
+++ b/target/linux/brcm2708/base-files/etc/board.d/02_network
@@ -11,10 +11,10 @@ board_config_update
board=$(brcm2708_board_name)
case "$board" in
-rpi-b |\
-rpi-b-plus |\
rpi-2-b |\
-rpi-3-b)
+rpi-3-b |\
+rpi-b |\
+rpi-b-plus)
ucidef_set_interface_lan "eth0"
;;
esac
diff --git a/target/linux/brcm2708/base-files/etc/diag.sh
b/target/linux/brcm2708/base-files/etc/diag.sh
index ecc6242..0f34a53 100644
--- a/target/linux/brcm2708/base-files/etc/diag.sh
+++ b/target/linux/brcm2708/base-files/etc/diag.sh
@@ -6,15 +6,15 @@
set_state() {
case "$(brcm2708_board_name)" in
+ rpi-2-b |\
+ rpi-b-plus)
+ status_led="led1"
+ ;;
rpi-b |\
rpi-cm |\
rpi-zero)
status_led="led0"
;;
- rpi-b-plus |\
- rpi-2-b)
- status_led="led1"
- ;;
esac
case "$1" in
diff --git a/target/linux/brcm2708/base-files/lib/brcm2708.sh
b/target/linux/brcm2708/base-files/lib/brcm2708.sh
index ab7a23d..3e7c30f 100644
--- a/target/linux/brcm2708/base-files/lib/brcm2708.sh
+++ b/target/linux/brcm2708/base-files/lib/brcm2708.sh
@@ -8,25 +8,25 @@ brcm2708_detect() {
model=$(cat /proc/device-tree/model)
case "$model" in
- "Raspberry Pi Model B Rev"*)
- board_name="rpi-b"
+ "Raspberry Pi 2 Model B Rev"*)
+ board_name="rpi-2-b"
+ ;;
+ "Raspberry Pi 3 Model B Rev"*)
+ board_name="rpi-3-b"
+ ;;
+ "Raspberry Pi Compute Module Rev"*)
+ board_name="rpi-cm"
;;
"Raspberry Pi Model B Plus Rev"* |\
"Raspberry Pi Model B+ Rev"*)
board_name="rpi-b-plus"
;;
- "Raspberry Pi Compute Module Rev"*)
- board_name="rpi-cm"
+ "Raspberry Pi Model B Rev"*)
+ board_name="rpi-b"
;;
"Raspberry Pi Zero Rev"*)
board_name="rpi-zero"
;;
- "Raspberry Pi 2 Model B Rev"*)
- board_name="rpi-2-b"
- ;;
- "Raspberry Pi 3 Model B Rev"*)
- board_name="rpi-3-b"
- ;;
*)
board_name="unknown"
;;
diff --git
a/target/linux/brcm2708/base-files/lib/preinit/05_set_preinit_iface_brcm2708
b/target/linux/brcm2708/base-files/lib/preinit/05_set_preinit_iface_brcm2708
index 578172e..c5756be 100644
--- a/target/linux/brcm2708/base-files/lib/preinit/05_set_preinit_iface_brcm2708
+++ b/target/linux/brcm2708/base-files/lib/preinit/05_set_preinit_iface_brcm2708
@@ -5,10 +5,10 @@
set_preinit_iface() {
case "$(brcm2708_board_name)" in
- rpi-b |\
- rpi-b-plus |\
rpi-2-b |\
- rpi-3-b)
+ rpi-3-b |\
+ rpi-b |\
+ rpi-b-plus)
ifname=eth0
;;
esac
--
2.10.2
_______________________________________________
Lede-dev mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/lede-dev
