Hello Piotr, On 27/03/2017 11:22:05 CEST, Piotr Dymacz wrote: > Hello Vittorio, > > On 26.03.2017 09:55, Vittorio Gambaletta (VittGam) wrote: >> This router has the same hardware of TP-LINK TL-WR841N v11 (same >> FCC ID, same TFTP image name...). >> >> The stock firmware web interface does not seem to accept the LEDE >> factory image, but it can be flashed via the u-boot TFTP recovery >> by long-pressing the reset button after power on. > > So, I have just made a test (using TL-WR841N v9 "converted" to v12 EU) > and factory-eu image works without any problems (Firefox 52).
Ok, perfect, then! > I'm going to pick up your patch with small change in commit message and > subject (please, don't add dot at the end of the subject next time). Thanks for your suggestion. I knew the exact contrary and in fact I'm adding dot at end of subject every time... Do you know if there is some place (that I might have very well missed if it exists...) where this kind of style rules are written? Cheers, Vittorio _______________________________________________ Lede-dev mailing list Lede-dev@lists.infradead.org http://lists.infradead.org/mailman/listinfo/lede-dev