Until LEDE will work with one CPU, I think changing buffers is
irrelevant. But maybe Im wrong. Could you be, please, more specific,
what do you mean "wattermarks" and buffers?
I think buffer increase helps, if the traffic is for the router. So if
I will do test from/to router. But I did test trough the router /router
does just forward these packets./. I have disabled firewall, unloaded
all modules for conntrack... and to one Interface is the generator
connected and to other is the reflector connected.
Thanks Milan
On Thu, Mar 30, 2017 at 8:11 PM, Philip Prindeville
<philipp_s...@redfish-solutions.com> wrote:
What happens if you allocate more buffers and increase your
watermarks but leave the maximum latency the same?
On Mar 30, 2017, at 11:53 AM, Milan Kočvara
<milankocv...@gmail.com> wrote:
Hello.
I have 2 Question, please
1. It is possible to rewrite the driver for MT761 to allow change
the MTU greather than 1500? If not, why? Some scenarios need
jumboframe enable
2. Edgerouter x with ubiquiti firmware has troughput between 2
routed interfaces with frames 1518B in about 500Mbit.
256B about 300Mbit.
64B about 35Mbit.
I did test for many frames length. I can share, If is needed.
With LEDE 17.01 is half of these values. (64B 17Mbit etc..... I did
test for many frames again. - without modules for nat(conntrack..).
Just with for_life_needed modules)
It seems, LEDE cannot use more cpus and ksoftirq use just one. (TOP
said 25% CPU load. - it has 4CPUs). It is known issue or just
feature?
Thanks BR Milan
_______________________________________________
Lede-dev mailing list
Lede-dev@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/lede-dev
