Citeren Giuseppe Lippolis <giu.lippo...@gmail.com>:
100.64.0.0/10 is shared address space under RFC6598. IETF seems to point to significant restrictions on its use. Customer connectivity issues are clear in the RFC. Chasing mobile load and avoiding rerouting global IP space is likely fair. Enumerating users fixed wire line end points is likely not fair. CGN should free IP from internal routing equipment for customer assignment. Depending on the consumer protections in your jurisdiction, you may wish to give your ISP a call.Thanks for the clarification. Currently I'm connecting through a 3G connection. It seems that I do not have a valid ipv6 as well (Is it correct?). usb0 Link encap:Ethernet HWaddr 02:00:FF:AA:AA:AA inet addr:100.70.226.65 Bcast:100.70.226.67 Mask:255.255.255.252 inet6 addr: fe80::ffff:feaa:aaaa/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:764 errors:0 dropped:0 overruns:0 frame:0 TX packets:677 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:522905 (510.6 KiB) TX bytes:80102 (78.2 KiB)
Assuming you anonimized your MAC address before posting, this looks like what one would expect for a mobile connection. Usually these don't allow inbound connections unless you have specifically requested this service, so it is unlikely you'd get globally accessible IPv4 and/of IPv6 addresses. The addresses will be fine for outbound connections over IPv4 (CGNAT) and IPv6 (link-local).
_______________________________________________ Lede-dev mailing list Lede-dev@lists.infradead.org http://lists.infradead.org/mailman/listinfo/lede-dev
