I reported the same before, perhaps a bit different description: https://bugs.lede-project.org/index.php?do=details&task_id=883&opened=704&ty pe%5B0%5D=&sev%5B0%5D=&due%5B0%5D=&cat%5B0%5D=&status%5B0%5D=open&percent%5B 0%5D=&reported%5B0%5D=
I found an overview here how ports are connected internally: https://kazoo.ga/re-visit-the-switch-in-edgerouter-x/ Not sure what it is, the driver file does state 8 ports. Wondering whether problem is in /LEDE/snapshot/target/linux/ramips/dts/mt7621.dtsi ? You are correct that port 5 isn't configured in switch defconfig script upon boot for ERX-SFP: /LEDE/snapshot/target/linux/ramips/base-files/etc/board.d/02_network tl-wr841n-v13|\ ubnt-erx|\ ubnt-erx-sfp|\ ur-326n4g|\ wrtnode|\ wrtnode2p | \ wrtnode2r | \ wt3020-4M|\ wt3020-8M|\ zbt-wa05) ucidef_add_switch "switch0" \ "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "6@eth0" -----Original Message----- From: Lede-dev [mailto:lede-dev-boun...@lists.infradead.org] On Behalf Of Torbjorn Jansson Sent: dinsdag 18 juli 2017 18:29 To: Sven Roederer <devel-s...@geroedel.de>; lede-dev@lists.infradead.org Subject: Re: [LEDE-DEV] [PATCH v2] ramips: add support for Ubiquiti EdgeRouter X-SFP On 2017-05-29 11:24, Sven Roederer wrote: > This patch adds support for the Ubiquiti EdgeRouter X-SFP and improves > support for the EdgeRouter X (PoE-passthrough). > > Specification: > - SoC: MediaTek MT7621AT > - Flash: 256 MiB > - RAM: 265 MiB > - Ethernet: 5 x LAN (1000 Mbps) > - UART: 1 x UART on PCB (3.3V, RX, TX, GND) - 57600 8N1 > - EdgeRouter X: > - 1 x PoE-Passtrough (Eth4) > - powered by Wallwart or passive PoE > - EdgeRouter X-SFP: > - 5 x PoE-Out (24V, passive) > - 1 x SFP (unknown status) > - powered by Wallwart (24V) regarding the sfp port, it does not show up on the luci switch page. this port seems to be missing. what i have is CPU (eth0) and then lan 1 to 4 and a WAN WAN is the port labeled eth0 on the device and then lan 1-4 must be eth1-4 sfp port is labeled eth5 and as far as i can tell doesn't work. is this just a minor config issue so this port is perhaps not configured at all with vlan and so on? _______________________________________________ Lede-dev mailing list Lede-dev@lists.infradead.org http://lists.infradead.org/mailman/listinfo/lede-dev _______________________________________________ Lede-dev mailing list Lede-dev@lists.infradead.org http://lists.infradead.org/mailman/listinfo/lede-dev
