The sender domain has a DMARC Reject/Quarantine policy which disallows
sending mailing list messages using the original "From" header.
To mitigate this problem, the original message has been wrapped
automatically by the mailing list software.
--- Begin Message ---
2017-07-21 01:41, Sergey Ryazanov rašė:
You should disable CONFIG_NET_DSA_MV88E6060 and select only
CONFIG_MVSWITCH_PHY=y option. This two different drivers, the first
one is mainstream Linux driver, and the second one is OpenWRT specific
driver, which is mach more simple and small.
This driver uses VLAN tags to determine which port the frame should be
sent from. Try to create couple of VLAN sub-interfaces on eth0 with ID
1 and 2 and work with them.
I'll try.
Yes, use the latest version of LEDE, please, to avoid facing with
long-forgotten bugs.
Tried the latest LEDE. Now I see in the boot log:
[ 6.507617] NPE-B: firmware's license can be found in
/usr/share/doc/LICENSE.IPL
[ 6.515168] NPE-B: firmware functionality 0x2, revision 0x2:1
[ 6.523171] eth0: link up, speed 0 Mb/s, full duplex
and now I see RX and TX packets on eth0 (they were 0 before).
How do I configure vlan? Here I changed eth0 to eth0.1:
config interface 'lan'
option type 'bridge'
option ifname 'eth0.1'
option proto 'static'
option ipaddr '192.168.1.1'
option netmask '255.255.255.0'
option ip6assign '60'
And just copy/pasted from another router:
config switch
option name 'rt305x'
option reset '1'
option enable_vlan '1'
config switch_vlan
option device 'rt305x'
option vlan '1'
option ports '0 1 2 3 5 6t'
config switch_vlan
option device 'rt305x'
option vlan '2'
option ports '4 6t'
But still RX and TX packets are on eth0, not eth0.1:
# ifconfig -a
br-lan Link encap:Ethernet HWaddr 00:18:39:21:0D:AE
inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fd63:bf56:4b8::1/60 Scope:Global
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
eth0 Link encap:Ethernet HWaddr 00:18:39:21:0D:AE
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:1 errors:0 dropped:0 overruns:0 frame:0
TX packets:7 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:241 (241.0 B) TX bytes:1551 (1.5 KiB)
eth0.1 Link encap:Ethernet HWaddr 00:18:39:21:0D:AE
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
eth1 Link encap:Ethernet HWaddr 00:18:39:21:0D:AF
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
lo Link encap:Local Loopback
Thanks,
Nerijus
--- End Message ---
_______________________________________________
Lede-dev mailing list
Lede-dev@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/lede-dev
