I have router with internal switch with 6 ports. The default config is: 0: LAN1 1: LAN2 2: LAN3 3: LAN4 4: WAN 5: CPU
I want to use port 3 (LAN4) for something different. Another network, mwan, whatever. For that purpose I edited /etc/config/network and replaced option ports '0 1 2 3 5t' with option ports '0 1 2 5t' for my VLAN 1 (lan interface). The problem is during preinit my /etc/config/network gets obviously ignored and 10_indicate_preinit does something like this: swconfig dev switch0 set reset 1 swconfig dev switch0 set enable_vlan 1 swconfig dev switch0 vlan 1 set ports 0 1 2 3 5t swconfig dev switch0 set apply It means all machines connected to ports 0 1 and 2 gain access to the network connected to the switch port 3. This happens for the whole preinit phase. This is undesired situation of course. Can you see any way of solving this? -- Rafał _______________________________________________ Lede-dev mailing list Lede-dev@lists.infradead.org http://lists.infradead.org/mailman/listinfo/lede-dev
