On 08/07/2017 06:13 PM, Lucian Cristian wrote: > On 07.08.2017 18:55, Hauke Mehrtens wrote: >> >> On 08/06/2017 08:16 PM, Lucian Cristian wrote: >>> On 04.08.2017 00:37, Hauke Mehrtens wrote: >>>> This upgrades the target to kernel 4.9 and also adds support for the >>>> Allwinner A64 SoC. This was only tested on the pine64+ and I do not own >>>> any older Allwinner SoC. >>>> >>>> Could someone please test this on an older 32 bit Allwinner SoC and >>>> report back some results. >>>> >>>> Hauke Mehrtens (13): >>>> kernel: add some config options >>>> sunix: add support for kernel 4.9 >>>> include: u-boot.mk: remove LEDE HOSTCPPFLAGS from u-boot >>>> HOSTCPPFLAGS >>>> uboot-sunxi: update to version 2017.07 >>>> uboot-sunxi: do not depend on dtc being install on host >>>> uboot-sunxi: revert the usage of binman >>>> sunxi: fix build of rtc package when module not available >>>> sunxi: split into cortex A8 and A7 subtarget >>>> arm-trusted-firmware-sunxi: add new package >>>> uboot-sunxi: build A64 SoC and pine64 U-Boot >>>> sunxi: Backport patches needed for A64 >>>> sunxi: Backport patches from kernel 4.11 for A64 >>>> sunxi: Add A64 support with cortex53 subtarget >>>> >>>> ... >>> On LIME2 I get the attached boot log >>> >>> >>> Regards >> Hi Lucian, >> >> Thanks you for testing. Could you send me your patch you applied to add >> LIME2 please. >> >> It looks like executing the init binary failed, could you try to only >> apply my patches till "sunxi: fix build of rtc package when module not >> available" please, I assume the subtarget split is somehow not working. >> >> Hauke > > I just added to the image/cortex-a7.mk, and no more dts patching like on > 4.4 > > define Device/sun7i-a20-olinuxino-lime2 > DEVICE_TITLE:=Olimex A20-OLinuXino-LIME2 > DEVICE_PACKAGES:=kmod-ata-core kmod-ata-sunxi kmod-rtc-sunxi kmod-usb-hid > SUPPORTED_DEVICES:=olimex,a20-olinuxino-lime2 > SUNXI_DTS:=sun7i-a20-olinuxino-lime2 > endef > > TARGET_DEVICES += sun7i-a20-olinuxino-lime2 > > > and for uboot patch from here > > https://github.com/lucize/source/commit/325304c62dd8f6ef1b82b94873397c31226a6f88#diff-1ab1035312dfd60272886d810ef44e7f > > > I actually own an eMMC version, tried that too, but is the same, for > eMMC uboot needs this > > https://github.com/armbian/build/blob/master/patch/u-boot/u-boot-sunxi/add-lime2-emmc.patch > > > I'll try without the split > > Regards >
Hi Lucian, The eMMC version needs an extra device tree file, could you please use this one: arch/arm/boot/dts/sun7i-a20-olinuxino-lime2-emmc.dts We should probably add two device one for the normal lime2 and one lime2-emmc. Hauke _______________________________________________ Lede-dev mailing list Lede-dev@lists.infradead.org http://lists.infradead.org/mailman/listinfo/lede-dev