On Dienstag, 7. November 2017 13:37:48 CET Matthias Schiffer wrote: [...] > > This patch was only tested with LEDE 17.01.4. And only in sta and mesh mode. [...] > > - local beacon_int brates mrate > > + > > This change is already in master, see > https://git.lede-project.org/?p=source.git;a=commitdiff;h=5e481881d7abd814abbf40a046be90cbaf835e72 > > Let's just backport this trivial change to lede-17.01.
Ok, I am fine with that
> > [ -n "$bssid" ] && append network_data "bssid=$bssid" "$N$T"
> > + [ -n "$beacon_int" ] && append network_data "beacon_int=$beacon_int"
> > "$N$T"
>
> 1a16cb9c67f0d2c530914aec31c721b75f03a908 moved setting beacon_int from
> wpa_supplicant_add_network() to hostapd_prepare_device_config(). Does
> encrypted IBSS/mesh setup somehow not use hostapd_prepare_device_config()?
> How do the resulting hostapd.conf look at the moment?
driver=nl80211
logger_syslog=127
logger_syslog_level=2
logger_stdout=127
logger_stdout_level=2
hw_mode=a
beacon_int=100
channel=36
ieee80211n=1
ht_coex=0
ht_capab=[HT40+][LDPC][SHORT-GI-20][SHORT-GI-40][TX-STBC][RX-STBC1][MAX-AMSDU-7935][DSSS_CCK-40]
vht_oper_chwidth=1
vht_oper_centr_freq_seg0_idx=42
ieee80211ac=1
vht_capab=[RXLDPC][SHORT-GI-80][TX-STBC-2BY1][RX-ANTENNA-PATTERN][TX-ANTENNA-PATTERN][RX-STBC-1][MAX-MPDU-11454][MAX-A-MPDU-LEN-EXP7]
interface=wlan0-1
ctrl_interface=/var/run/hostapd
ap_isolate=1
disassoc_low_ack=1
preamble=1
wmm_enabled=1
ignore_broadcast_ssid=0
uapsd_advertisement_enabled=1
auth_algs=1
wpa=0
ssid=LEDE5
bridge=br-lan
bssid=ac:86:74:61:4c:30
So beacon_int is set. But this is how the wpa_supplicant config looks without
this line:
network={
ssid="test2"
key_mgmt=SAE
mode=5
frequency=2462
psk="9f0a965af38f2d0a13b66d8b46ab962c"
mcast_rate=18
}
The line
[ -n "$beacon_int" ] && append network_data "beacon_int=$beacon_int" "$N$T"
in wpa_supplicant_add_network is required to also add the beacon_int= setting.
Kind regards,
Sven
signature.asc
Description: This is a digitally signed message part.
_______________________________________________ Lede-dev mailing list Lede-dev@lists.infradead.org http://lists.infradead.org/mailman/listinfo/lede-dev
