On Mon, Nov 20, 2017 at 10:53 AM, Christian Lamparter <chunk...@gmail.com> wrote: > On Monday, November 20, 2017 9:45:28 AM CET Matthew McClintock wrote: >> Did you get ath10k working on ipq4019? > > Yes, I managed to upstream the wifi dts changes some time ago and they > all have been accepted. In fact the new 4.14 does ships with those. > > https://patchwork.kernel.org/patch/9858197/ > > How is your upstreaming progess going? > >> I'm having issues with the board data files? I've never messed with this. > > What do you want to know? > > I'm assuming that you are looking for a way to package the two board.bin > (2GHz and 5GHz) into a board-2.bin. You can just use the ath10k-bdencoder > tool from the <https://github.com/qca/qca-swiss-army-knife> > > Note: ath10k-bdencoder can also unpack existing board-2.bin that are > currently shipped with any of the the ipq-wifi packages. So the fastest way > would be to unpack a existing board-2.bin (this will create a .json file and > the individual .bins). Then you just have to replace the two board.bin files > and repack it (the repack process will need the created .json file again.) > > If this isn't what you are looking for, you might find it in the > "firmware: add custom IPQ wifi board definitions" commit message. >
Caveat: I'm using an older version of ath10k at the moment, but.... I think it's complaining that it can't find the right board info from the board-2.bin file which is just multiple board files wrapped up together? [ 233.761660] ath10k_ahb a000000.wifi: failed to fetch board data for bus=ahb,vendor=0000,device=0000,subsystem-vendor=0000,subsystem-device=0000 from ath10k/QCA4019/hw1.0/board-2.bin This is the first pass, it moves onto board.bin but still fails (the file is not present). Where is a description of the which board.bin files to use for which radios? Where does this info come from? Somewhere in the radio or OTP? Interestingly, PCI is complaining too: [ 236.712965] ath10k_pci 0000:01:00.0: failed to fetch board data for bus=pci,bmi-chip-id=0,bmi-board-id=19 from ath10k/QCA9888/hw2.0/board-2.bin Is my board just not setup right? Missing OTP id? I guess I can force a working radio with a board.bin file? Thanks again, -M _______________________________________________ Lede-dev mailing list Lede-dev@lists.infradead.org http://lists.infradead.org/mailman/listinfo/lede-dev