On Sun, Dec 17, 2017 at 9:20 PM, Y.b. Lu <yangbo...@nxp.com> wrote: > Hi, > > (Resent the email since HTML format email was rejected by mailing list...) > > Has anyone seen below issue when LEDE started up. The system would hang when > created jffs2 area. > This issue occurred on QSPI flash on layerscape like ls1046ardb, but Nor > flash worked fine with same rootfs like ls1043ardb. > > [ 2.298409] fsl-quadspi 1550000.quadspi: s25fl512s (65536 Kbytes) > [ 2.304658] 9 cmdlinepart partitions found on MTD device 1550000.quadspi > [ 2.311674] Creating 9 MTD partitions on "1550000.quadspi": > [ 2.317676] 0x000000000000-0x000000100000 : "rcw" > [ 2.327552] 0x000000100000-0x000000300000 : "u-boot" > [ 2.337822] 0x000000300000-0x000000400000 : "u-boot-env" > [ 2.348446] 0x000000400000-0x000000900000 : "reserved-1" > [ 2.359001] 0x000000900000-0x000000940000 : "fman" > [ 2.369017] 0x000000940000-0x000000f00000 : "reserved-2" > [ 2.379597] 0x000000f00000-0x000001000000 : "dtb" > [ 2.389523] 0x000001000000-0x000002000000 : "kernel" > [ 2.399723] 0x000002000000-0x000004000000 : "rootfs" > [ 2.409917] mtd: device 8 (rootfs) set to be root filesystem > > Actually jffs2 rootfs worked fine on QSPI flash, but we don't know why it > failed with LEDE squashfs when create jffs2 area. > Any suggestion to find out the root casue? Or any config may casue this issue? > > Appreciate your help.
Do you have a more complete log? -M _______________________________________________ Lede-dev mailing list Lede-dev@lists.infradead.org http://lists.infradead.org/mailman/listinfo/lede-dev
