Use the "low" and "high" values to configure the GPIO as an output with
that initial value. It ensures that the gpio doesn't have a unwanted value
during the time the direction is set to ouput and the actual value is
applied.
We don't need to take care of the GPIO polarity for now, since our
exported GPIOs are always active low.
Cc: Lars Kruse <li...@sumpfralle.de>
Signed-off-by: Mathias Kresin <d...@kresin.me>
---
package/base-files/Makefile | 2 +-
package/base-files/files/etc/init.d/gpio_switch | 5 ++---
2 files changed, 3 insertions(+), 4 deletions(-)
diff --git a/package/base-files/Makefile b/package/base-files/Makefile
index 728d787..d0c9d6b 100644
--- a/package/base-files/Makefile
+++ b/package/base-files/Makefile
@@ -12,7 +12,7 @@ include $(INCLUDE_DIR)/version.mk
include $(INCLUDE_DIR)/feeds.mk
PKG_NAME:=base-files
-PKG_RELEASE:=179
+PKG_RELEASE:=180
PKG_FLAGS:=nonshared
PKG_FILE_DEPENDS:=$(PLATFORM_DIR)/ $(GENERIC_PLATFORM_DIR)/base-files/
diff --git a/package/base-files/files/etc/init.d/gpio_switch
b/package/base-files/files/etc/init.d/gpio_switch
index 5a62be9..b67950a 100755
--- a/package/base-files/files/etc/init.d/gpio_switch
+++ b/package/base-files/files/etc/init.d/gpio_switch
@@ -22,10 +22,9 @@ load_gpio_switch()
echo "$gpio_pin" >/sys/class/gpio/export
# we need to wait a bit until the GPIO appears
[ -d "$gpio_path" ] || sleep 1
- echo out >"$gpio_path/direction"
}
- # write 0 or 1 to the "value" field
- { [ "$value" = "0" ] && echo "0" || echo "1"; } >"$gpio_path/value"
+ # set the pin to output with high or low pin value
+ { [ "$value" = "0" ] && echo "high" || echo "low"; }
>"$gpio_path/direction"
}
service_triggers()
--
2.7.4
_______________________________________________
Lede-dev mailing list
Lede-dev@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/lede-dev
