On 01/03/2018 04:21 AM, Y.b. Lu wrote: > Hi Hauke, > > The layerscape maintainer info should be no problem. You just sent wrong > email address to me. (cyangbo...@nxp.com) > MAINTAINER:=Yangbo Lu <yangbo...@nxp.com>
Will you send a patch to update the Maintainer? > I will cherry-pick this patch to our internal LEDE git tree. Test team will > test all devices, and we will have a release on our github by end of January. > https://github.com/qoriq-open-source/LEDE-source John already merged this patch, see here: https://git.lede-project.org/?p=openwrt/openwrt.git;a=commitdiff;h=597de6904c39e02a8aa008f50ff19c6793117194 Mathew McBride also tested this on his LS1043 board and did not notice any problems. Hauke > > I will send related patches to community after release. > Thanks a lot. > > > Best regards, > Yangbo Lu > > >> -----Original Message----- >> From: Hauke Mehrtens [mailto:ha...@hauke-m.de] >> Sent: 2018年1月2日 0:04 >> To: lede-dev@lists.infradead.org; Y.b. Lu <yangbo...@nxp.com> >> Subject: Re: [PATCH] layerscape: activate fpu feature >> >> Hi Yangbo Lu, >> >> Can you please test this patch on your hardware. >> >> >> I send a mail to yangbo...@nxp.com who is listed as the current layerscape >> maintainer, but it was rejected by your mail server: >> >> <cyangbo...@nxp.com>: host >> nxp-com.mail.protection.outlook.com[213.199.154.170] said: 550 5.4.1 >> [cyangbo...@nxp.com]: Recipient address rejected: Access denied >> [DB5EUR01FT058.eop-EUR01.prod.protection.outlook.com] (in reply to RCPT >> TO command) >> >> Are you the current maintainer? If so can you please send a patch to fix this >> please. >> >> Hauke >> >> >> On 01/01/2018 04:58 PM, Hauke Mehrtens wrote: >>> The CPU sub type was set to a CPU version with FPU, but the FPU >>> feature was not activated before, so a soft float toolchain was created. >>> Activate also the FPU feature to create the correct toolchain. >>> >>> Signed-off-by: Hauke Mehrtens <ha...@hauke-m.de> >>> --- >>> >>> This probably fixes a problem, but I do not have any layerscape >>> hardware, could someone please test this on real hardware and report >>> back if it still works. >>> >>> A complete rebuild incl. toolchain is needed. >>> >>> target/linux/layerscape/Makefile | 2 +- >>> 1 file changed, 1 insertion(+), 1 deletion(-) >>> >>> diff --git a/target/linux/layerscape/Makefile >>> b/target/linux/layerscape/Makefile >>> index 67da8449aa..bd91556ef4 100644 >>> --- a/target/linux/layerscape/Makefile >>> +++ b/target/linux/layerscape/Makefile >>> @@ -10,7 +10,7 @@ BOARD:=layerscape >>> BOARDNAME:=NXP Layerscape >>> DEVICE_TYPE:=developerboard >>> KERNEL_PATCHVER:=4.9 >>> -FEATURES:=squashfs nand usb pcie gpio >>> +FEATURES:=squashfs nand usb pcie gpio fpu >>> SUBTARGETS:=armv8_64b armv8_32b >>> MAINTAINER:=Yangbo Lu <yangbo...@nxp.com> >>> >>> > _______________________________________________ Lede-dev mailing list Lede-dev@lists.infradead.org http://lists.infradead.org/mailman/listinfo/lede-dev