I did a sysupgrade, was trying to keep my configuration.
<</etc/config/network
config interface 'loopback'
option ifname 'lo'
option proto 'static'
option ipaddr '127.0.0.1'
option netmask '255.0.0.0'
option ipv6 '0'
config globals 'globals'
config interface 'lan'
option type 'bridge'
option proto 'static'
option netmask '255.255.255.0'
option ip6assign '60'
option ipaddr '192.168.41.1'
option ifname 'eth0 eth0.1'
option ipv6 '0'
config interface 'wan'
option ifname 'eth0.2'
option proto 'static'
option ipaddr '192.168.40.5'
option netmask '255.255.255.0'
option delegate '0'
config switch
option name 'switch0'
option reset '1'
option enable_vlan '1'
config switch_vlan
option device 'switch0'
option vlan '1'
option ports '4 0 1 2 8t'
config switch_vlan
option device 'switch0'
option vlan '2'
option ports '3 8t'
On 03/03/2018 08:30 PM, Rosen Penev wrote:
On Sat, Mar 3, 2018 at 5:26 PM, TheWerthFam <thewerth...@gmail.com> wrote:
17.01.4 works great currently on this platform, just trying out the cutting
edge and found the switch configuration not existent.
swconfig list returns no results.
Normally swconfig returns
Found: switch0 - eth0
Found: switch1 - eth0
The interfaces eth0.1 eth0.2 etc are created, but they don't pass any
traffic. LAN ports and the WAN port LEDs seem to work in their normal
quirky way with devices connected but they don't pass any traffic.
Any advice and direction of work that needs to be done would be appreciated.
Did you clear settings when upgrading? Please post /etc/config/network.
This sounds like the switch driver is missing.
Cheers
Derek
_______________________________________________
Lede-dev mailing list
Lede-dev@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/lede-dev
_______________________________________________
Lede-dev mailing list
Lede-dev@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/lede-dev
