TP-Link TL-WR902AC v3 is a pocket-size dual-band (AC750) router
based on MediaTek MT7628N + MT7650E.
Specification:
- MediaTek MT7628N/N (580 Mhz)
- 64 MB of RAM
- 8 MB of FLASH
- 2T2R 2.4 GHz and 1T1R 5 GHz
- 1x 10/100 Mbps Ethernet
* MT7650 ac chip isn't not supported by LEDE/OpenWrt at the moment.
Therefore 5Ghz won' work.
Flash instruction:
The only way to flash LEDE image in TL-WR902AC v3 is to use
tftp recovery mode in U-Boot:
1. Configure PC with static IP 192.168.0.66/24 and tftp server.
2. Rename
"openwrt-ramips-mt76x8-tplink_tl-wr902ac-v3-squashfs-tftp-recovery.bin"
to "tp_recovery.bin" and place it in tftp server directory.
3. Connect PC with the LAN port, press the reset button, power up
the router and keep button pressed for around 6-7 seconds, until
device starts downloading the file.
4. Router will download file from server, write it to flash and reboot.
Signed-off-by: Peter Lundkvist <peter.lundkv...@gmail.com>
---
target/linux/ramips/base-files/etc/board.d/01_leds | 5 +
.../linux/ramips/base-files/etc/board.d/02_network | 4 +
target/linux/ramips/base-files/etc/diag.sh | 1 +
.../ramips/base-files/lib/upgrade/platform.sh | 1 +
target/linux/ramips/dts/TL-WR902ACV3.dts | 102 +++++++++++++++++++++
target/linux/ramips/image/mt76x8.mk | 15 +++
6 files changed, 128 insertions(+)
create mode 100644 target/linux/ramips/dts/TL-WR902ACV3.dts
diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds
b/target/linux/ramips/base-files/etc/board.d/01_leds
index 0a870d9f6c..2722c9623b 100755
--- a/target/linux/ramips/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/base-files/etc/board.d/01_leds
@@ -413,6 +413,11 @@ tplink,tl-mr3420-v5)
ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0"
"0x1e"
ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0"
"0x01"
;;
+tplink,tl-wr902ac-v3)
+ set_usb_led "$boardname:green:usb"
+ ucidef_set_led_netdev "wlan2g" "wlan2g" "$boardname:green:wlan" "wlan0"
+ ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0"
"0x10"
+ ;;
u25awf-h1)
set_wifi_led "u25awf:red:wifi"
ucidef_set_led_netdev "eth" "eth" "u25awf:green:lan" "eth0"
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network
b/target/linux/ramips/base-files/etc/board.d/02_network
index 20ecf1ab76..f05c0c7441 100755
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -319,6 +319,10 @@ ramips_setup_interfaces()
ucidef_add_switch "switch0" \
"1:lan" "2:lan" "3:lan" "4:lan" "5:wan" "0@eth0"
;;
+ tplink,tl-wr902ac-v3)
+ ucidef_add_switch "switch0" \
+ "4:lan" "6@eth0"
+ ;;
vonets,var11n-300|\
wt1520-4M|\
wt1520-8M)
diff --git a/target/linux/ramips/base-files/etc/diag.sh
b/target/linux/ramips/base-files/etc/diag.sh
index 2e326af0ed..e91d167a08 100644
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -41,6 +41,7 @@ get_status_led() {
tplink,c20-v4|\
tplink,c50-v3|\
tplink,tl-mr3420-v5|\
+ tplink,tl-wr902ac-v3|\
tl-wr840n-v4|\
tl-wr840n-v5|\
tl-wr841n-v13|\
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh
b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index d2bd860cb1..eb26e46a81 100755
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -250,6 +250,7 @@ platform_check_image() {
tplink,c20-v4|\
tplink,c50-v3|\
tplink,tl-mr3420-v5|\
+ tplink,tl-wr902ac-v3|\
tl-wr840n-v4|\
tl-wr840n-v5|\
tl-wr841n-v13)
diff --git a/target/linux/ramips/dts/TL-WR902ACV3.dts
b/target/linux/ramips/dts/TL-WR902ACV3.dts
new file mode 100644
index 0000000000..069ad0b133
--- /dev/null
+++ b/target/linux/ramips/dts/TL-WR902ACV3.dts
@@ -0,0 +1,102 @@
+/dts-v1/;
+
+#include "TPLINK-8M.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "tplink,tl-wr902ac-v3", "mediatek,mt7628an-soc";
+ model = "TP-Link TL-WR902AC v3";
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ sw1 {
+ label = "sw1";
+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+
+ sw2 {
+ label = "sw2";
+ gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_1>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ lan {
+ label = "tl-wr902ac-v3:green:lan";
+ gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
+ };
+
+ power {
+ label = "tl-wr902ac-v3:green:power";
+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+ };
+
+ usb {
+ label = "tl-wr902ac-v3:green:usb";
+ gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+ };
+
+ wan {
+ label = "tl-wr902ac-v3:green:wan";
+ gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan {
+ label = "tl-wr902ac-v3:green:wlan";
+ gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+ };
+
+ wps {
+ label = "tl-wr902ac-v3:green:wps";
+ gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "i2s", "p0led_an", "p2led_an",
"p4led_an", "uart1", "wdt", "wled_an";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
+
+&pcie {
+ status = "okay";
+
+ pcie-bridge {
+ mt76@1,0 {
+ reg = <0x0000 0 0 0 0>;
+ device_type = "pci";
+ mediatek,mtd-eeprom = <&factory 0x28000>;
+ ieee80211-freq-limit = <5000000 6000000>;
+ mtd-mac-address = <&factory 0xf100>;
+ mtd-mac-address-increment = <(-1)>;
+ };
+ };
+};
diff --git a/target/linux/ramips/image/mt76x8.mk
b/target/linux/ramips/image/mt76x8.mk
index bcee98ef45..4362c3bc43 100644
--- a/target/linux/ramips/image/mt76x8.mk
+++ b/target/linux/ramips/image/mt76x8.mk
@@ -196,6 +196,21 @@ define Device/tplink_tl-mr3420-v5
endef
TARGET_DEVICES += tplink_tl-mr3420-v5
+define Device/tplink_tl-wr902ac-v3
+ $(Device/tplink)
+ DTS := TL-WR902ACV3
+ IMAGE_SIZE := 7808k
+ DEVICE_TITLE := TP-Link TL-WR902AC v3
+ TPLINK_FLASHLAYOUT := 8Mmtk
+ TPLINK_HWID := 0x000dc88f
+ TPLINK_HWREV := 0x89
+ TPLINK_HWREVADD := 0x1
+ TPLINK_HVERSION := 3
+ IMAGES += factory.bin
+ DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport
+endef
+TARGET_DEVICES += tplink_tl-wr902ac-v3
+
define Device/u7628-01-128M-16M
DTS := U7628-01-128M-16M
IMAGE_SIZE := 16064k
--
2.15.1
_______________________________________________
Lede-dev mailing list
Lede-dev@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/lede-dev
