On Sonntag, 18. März 2018 00:24:06 CET Hauke Mehrtens wrote: > Hi, > > After the upgrade to GCC 7.3 the kernel on the apm821xx target gets too > big for the meraki_mr24 device and the build in build bot is failing. > Could you please have a look at this problem: > http://phase1.builds.lede-project.org/builders/apm821xx%2Fnand >From what I remember, the limits are set in place to accomodate the initramfs image. And the initramfs is currently limited by these u-boot varliables:
meraki_loadaddr=c00000 meraki_loadaddr_kernel=c10000 meraki_loadaddr_fdt=c00400 meraki_loadaddr_ramdisk=e00000 The image (with the meraki header) get loaded to c00000. The FDT is located at 0xc00400 - 0xc0ffff = 64512 Bytes (DTB_SIZE) The kernel has to fit into 0xc10000 - 0xe00000 = 2031616 Bytes (1984 KB aka. KERNEL_SIZE) And the ram disk is from 0xe00000 onward. The kernel for sysupgrade.tar does not have such a limitation. Chris do you have any idea? _______________________________________________ Lede-dev mailing list Lede-dev@lists.infradead.org http://lists.infradead.org/mailman/listinfo/lede-dev
