On 2018-03-20 09:54, Kyson Lok wrote:
Override the LAN MAC to use the same address as WAN.
The stock firmware uses the same MAC address for all
interfaces.
Besides blindly following the stock firmware behavior,
is there *any* advantage in doing this?
Signed-off-by: Kyson Lok <kyson...@gmail.com>
---
target/linux/ramips/base-files/etc/board.d/02_network | 1 +
1 file changed, 1 insertion(+)
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network
b/target/linux/ramips/base-files/etc/board.d/02_network
index 03f718e..c26d77f 100755
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -441,6 +441,7 @@ ramips_setup_macs()
wan_mac=$(mtd_get_mac_ascii config WAN_MAC_ADDR)
;;
gl-mt300n-v2)
+ lan_mac=$(mtd_get_mac_binary factory 4)
wan_mac=$(mtd_get_mac_binary factory 4)
;;
hc5*61|\
_______________________________________________
Lede-dev mailing list
Lede-dev@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/lede-dev
