hi people, i'm moving my first step on the source code side, im' not a
coder, then sorry if i make some big mistake !!
i have a router MqMaker WITI board , this router is supported in the
tree but only in the 256mb ram flavour , but my version is the 512 mb
flavour
following this guide i change the code
https://openwrt.org/docs/guide-developer/adding_new_device
basing my work on this source
https://git.openwrt.org/openwrt/openwrt.git
but without success ,when i boot via tftp i obtain a kernal panic ...
here the file fist , that i've changed
grep -lri witi ./
./linux/ramips/base-files/etc/board.d/02_network
./linux/ramips/base-files/etc/diag.sh
./linux/ramips/base-files/lib/ramips.sh
./linux/ramips/base-files/lib/upgrade/platform.sh
./linux/ramips/base-files/sbin/fixup-mac-address
./linux/ramips/dts/WITI.dts
./linux/ramips/dts/WITI512.dts
./linux/ramips/image/mt7621.mk
and here the diff
+++ ./witi/target/linux/ramips/base-files/etc/diag.sh 2018-04-24
08:33:36.448378665 +0000
--- ./openwrt/target/linux/ramips/base-files/etc/diag.sh 2018-04-26
08:07:28.992222123 +0000
@@ -280,7 +280,6 @@
;;
w306r-v20|\
witi|\
+ witi512|\
zbt-wr8305rt)
status_led="$boardname:green:sys"
;;
+++ ./witi/target/linux/ramips/base-files/etc/diag.sh 2018-04-24
08:33:36.448378665 +0000
--- ./openwrt/target/linux/ramips/base-files/etc/diag.sh 2018-04-26
08:07:28.992222123 +0000
@@ -280,7 +280,6 @@
;;
w306r-v20|\
witi|\
+ witi512|\
zbt-wr8305rt)
status_led="$boardname:green:sys"
;;
+++ ./witi/target/linux/ramips/base-files/lib/ramips.sh 2018-04-24
08:34:29.507527711 +0000
--- ./openwrt/target/linux/ramips/base-files/lib/ramips.sh 2018-04-26
08:07:28.996222067 +0000
@@ -580,9 +580,6 @@
*"WiTi")
name="witi"
;;
+ *"WiTi-512")
+ name="witi-512"
+ ;;
*"WIZARD 8800")
name="wizard8800"
;;
--- ./openwrt/target/linux/ramips/base-files/lib/upgrade/platform.sh
2018-04-26 08:07:28.996222067 +0000
+++ ./witi/target/linux/ramips/base-files/lib/upgrade/platform.sh
2018-04-24 08:34:54.147140864 +0000
@@ -173,6 +173,7 @@
widora,neo-16m|\
widora,neo-32m|\
witi|\
+ witi512|\
wizfi630a|\
wl-330n|\
wl-330n3g|\
--- ./openwrt/target/linux/ramips/base-files/sbin/fixup-mac-address
2018-04-26 08:07:28.996222067 +0000
+++ ./witi/target/linux/ramips/base-files/sbin/fixup-mac-address
2018-04-24 08:36:16.185887196 +0000
@@ -17,6 +17,15 @@
echo "Unsupported board"
exit 1
;;
+
+ witi512)
+ partname=factory
+ offset=$((0xe000))
+ ;;
+ *)
+ echo "Unsupported board"
+ exit 1
+ ;;
esac
while [ -n "$1" ]; do
--- ./openwrt/target/linux/ramips/dts/WITI.dts 2018-04-26
08:07:29.004221953 +0000
+++ ./witi/target/linux/ramips/dts/WITI512.dts 2018-04-24
08:21:24.814159470 +0000
@@ -7,11 +7,11 @@
/ {
compatible = "mqmaker,witi", "mediatek,mt7621-soc";
- model = "MQmaker WiTi";
+ model = "MQmaker WiTi (512)";
memory@0 {
device_type = "memory";
- reg = <0x0 0x10000000>;
+ reg = <0x0 0x20000000>;
};
chosen {
--- ./openwrt/target/linux/ramips/image/mt7621.mk 2018-04-26
08:07:29.012221838 +0000
+++ ./witi/target/linux/ramips/image/mt7621.mk 2018-04-24
08:40:45.574063959 +0000
@@ -320,6 +320,16 @@
endef
TARGET_DEVICES += witi
+define Device/witi512
+ DTS := WITI512
+ IMAGE_SIZE := $(ralink_default_fw_size_16M)
+ DEVICE_TITLE := MQmaker WiTi 512
+ DEVICE_PACKAGES := \
+ kmod-ata-core kmod-ata-ahci kmod-mt76x2 kmod-sdhci-mt7620
kmod-usb3 \
+ kmod-usb-ledtrig-usbport wpad-mini
+endef
+TARGET_DEVICES += witi512
+
define Device/wndr3700v5
DTS := WNDR3700V5
IMAGE_SIZE := $(ralink_default_fw_size_16M)
and here the boot log
https://pastebin.com/n78TAhmr
how i can fix it ? where i must put my eyes on ?
_______________________________________________
Lede-dev mailing list
Lede-dev@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/lede-dev
