I haven't looked into it, but is there an easy way to disable the pch? That may be an avenue that could point to the problem. I recall that pch on gcc has been problematic at some point.
On Sun, May 4, 2014 at 5:35 AM, thierry <[email protected]> wrote: > 1) > > Here is what I did > > - install virtualbox > - download ubuntu 14.04 and install it into virtualbox > - sudo apt-get update && sudo apt-get upgrade (inside the VM) > - and then pursue with my previous post (inside the VM) > > I did the whole process twice, so I have some self-assurance that my trick > works on *vanilla* ubuntu 14.04. > > But today, I just tried to compile ledger using the same process as > described in email above, but without installing again the VM. And it > fails... > > 2) > > But after several trials and errors, I found that the below commands > worked for me. > > rm -rf ledger/ > git clone git://github.com/ledger/ledger.git > cd ledger/ > git submodule update --init > cmake . -DUSE_DOXYGEN=1 -DUSE_PYTHON=1 > make > > I can see that the above commands are skipping the step "Generating > ../system.hh.pch". Perhaps system.hh.pch is what is making the compilation > to fail ? > > 3) > > I also believe there is something wrong with system.hh.pch, because of the > following. > I have tried to switch to clang (I do not know the proper way, I only set > CXX). > I have an error also related to system.hh.pch. > > > Thierry > > > ----------8<--------------------8<--------------------8<---------- > > $ rm -rf ledger/ > $ git clone git://github.com/ledger/ledger.git > $ cd ledger/ > $ export CXX=clang > > $ ./acprep --verbose update > acprep: INFO: Invoking primary phase: update > acprep: INFO: Executing phase: update > acprep: INFO: Executing phase: pull > Already up-to-date. > acprep: INFO: Executing phase: submodule > Sous-module 'lib/utfcpp' (http://github.com/ledger/utfcpp.git) enregistré > pour le chemin 'lib/utfcpp' > Clonage dans 'lib/utfcpp'... > remote: Reusing existing pack: 37, done. > remote: Total 37 (delta 0), reused 0 (delta 0) > Unpacking objects: 100% (37/37), done. > Vérification de la connectivité... fait. > Chemin de sous-module 'lib/utfcpp' : > '2233ec933f5661c7050b94d3b14f5f9f51ae3d55' extrait > acprep: INFO: Executing phase: make > acprep: INFO: Executing phase: config > acprep: INFO: Executing phase: submodule > acprep: INFO: Executing phase: configure > acprep: INFO: System type is => Linux > acprep: INFO: Setting up build flavor => debug > -- The C compiler identification is GNU 4.8.2 > -- The CXX compiler identification is Clang 3.4.0 > -- Check for working C compiler: /usr/bin/cc > -- Check for working C compiler: /usr/bin/cc -- works > -- Detecting C compiler ABI info > -- Detecting C compiler ABI info - done > -- Check for working CXX compiler: /usr/bin/clang > -- Check for working CXX compiler: /usr/bin/clang -- works > -- Detecting CXX compiler ABI info > -- Detecting CXX compiler ABI info - done > -- Found PythonInterp: /usr/bin/python (found version "2.7.6") > -- Boost version: 1.55.0 > -- Found the following Boost libraries: > -- date_time > -- filesystem > -- system > -- iostreams > -- regex > -- unit_test_framework > -- Looking for access > -- Looking for access - found > -- Looking for realpath > -- Looking for realpath - found > -- Looking for getpwuid > -- Looking for getpwuid - found > -- Looking for getpwnam > -- Looking for getpwnam - found > -- Looking for isatty > -- Looking for isatty - found > -- Performing Test UNIX_PIPES_COMPILES > -- Performing Test UNIX_PIPES_COMPILES - Success > -- Performing Test BOOST_REGEX_UNICODE_RUNS > -- Performing Test BOOST_REGEX_UNICODE_RUNS - Failed > -- Looking for readline in edit > -- Looking for readline in edit - found > -- Configuring done > -- Generating done > -- Build files have been written to: /home/thierry/ledger > /usr/bin/cmake -H/home/thierry/ledger -B/home/thierry/ledger > --check-build-system CMakeFiles/Makefile.cmake 0 > /usr/bin/cmake -E cmake_progress_start /home/thierry/ledger/CMakeFiles > /home/thierry/ledger/CMakeFiles/progress.marks > make -f CMakeFiles/Makefile2 all > make[1]: entrant dans le répertoire « /home/thierry/ledger » > make -f src/CMakeFiles/libledger.dir/build.make > src/CMakeFiles/libledger.dir/depend > make[2]: entrant dans le répertoire « /home/thierry/ledger » > /usr/bin/cmake -E cmake_progress_report /home/thierry/ledger/CMakeFiles 10 > [ 1%] Generating ../system.hh.pch > cd /home/thierry/ledger/src && rm -f /home/thierry/ledger/system.hh.pch > cd /home/thierry/ledger/src && /usr/bin/clang -g -fPIC -x c++-header -c > /home/thierry/ledger/system.hh -o /home/thierry/ledger/system.hh.pch > -isystem /usr/include -isystem /usr/include/x86_64-linux-gnu -isystem > /usr/include -isystem /usr/include -isystem /home/thierry/ledger/lib > -isystem /home/thierry/ledger/lib/utfcpp/source -isystem > /home/thierry/ledger > cd /home/thierry/ledger && /usr/bin/cmake -E cmake_depends "Unix > Makefiles" /home/thierry/ledger /home/thierry/ledger/src > /home/thierry/ledger /home/thierry/ledger/src > /home/thierry/ledger/src/CMakeFiles/libledger.dir/DependInfo.cmake --color= > Dependee > "/home/thierry/ledger/src/CMakeFiles/libledger.dir/DependInfo.cmake" is > newer than depender > "/home/thierry/ledger/src/CMakeFiles/libledger.dir/depend.internal". > Dependee > "/home/thierry/ledger/src/CMakeFiles/CMakeDirectoryInformation.cmake" is > newer than depender > "/home/thierry/ledger/src/CMakeFiles/libledger.dir/depend.internal". > Scanning dependencies of target libledger > make[2]: quittant le répertoire « /home/thierry/ledger » > make -f src/CMakeFiles/libledger.dir/build.make > src/CMakeFiles/libledger.dir/build > make[2]: entrant dans le répertoire « /home/thierry/ledger » > /usr/bin/cmake -E cmake_progress_report /home/thierry/ledger/CMakeFiles 11 > [ 3%] Building CXX object src/CMakeFiles/libledger.dir/stats.cc.o > cd /home/thierry/ledger/src && /usr/bin/clang -Dlibledger_EXPORTS -g > -fPIC -isystem /usr/include/x86_64-linux-gnu -I/home/thierry/ledger/lib > -I/home/thierry/ledger/lib/utfcpp/source -I/home/thierry/ledger > -std=c++11 -Weverything -Wno-disabled-macro-expansion -Wno-padded > -Wno-weak-vtables -Wno-exit-time-destructors -Wno-global-constructors > -Wno-switch-enum -Wno-missing-prototypes -Wno-missing-noreturn > -Wno-unused-parameter -Wno-c++98-compat -fno-limit-debug-info -include > /home/thierry/ledger/system.hh -o CMakeFiles/libledger.dir/stats.cc.o -c > /home/thierry/ledger/src/stats.cc > error: C++0x was disabled in PCH file but is currently enabled > 1 error generated. > make[2]: *** [src/CMakeFiles/libledger.dir/stats.cc.o] Erreur 1 > make[2]: quittant le répertoire « /home/thierry/ledger » > make[1]: *** [src/CMakeFiles/libledger.dir/all] Erreur 2 > make[1]: quittant le répertoire « /home/thierry/ledger » > make: *** [all] Erreur 2 > acprep: ERROR: Execution failed: make VERBOSE=1 > > ----------8<--------------------8<--------------------8<---------- > > > On Saturday, May 3, 2014 1:57:18 PM UTC+2, Hans Erik van Elburg wrote: >> >> Hi Thierry, >> >> That does not work for me unfortunately. make gives the same error as acprep >> update does >> >> /Hans Erik >> >> Op zaterdag 3 mei 2014 00:40:23 UTC+2 schreef thierry: >>> >>> On vanilla Ubuntu 14.04, I managed to compile, with some trick: >>> >>> a) Install dependencies, the following were the minimum for me: >>> build-essential cmake doxygen libboost-system1.55-dev >>> libboost1.55-dev python-dev gettext git libboost-date-time1.55-dev >>> libboost-filesystem1.55-dev libboost-iostreams1.55-dev >>> libboost-python1.55-dev libboost-regex1.55-dev libboost-test1.55-dev >>> libedit-dev libgmp3-dev libmpfr-dev texinfo >>> >>> b) Clone repository : >>> git clone git://github.com/ledger/ledger.git >>> >>> c) Change directory to ledger, then : >>> ./acprep update >>> --> this fails as described in first post from James >>> >>> d) Launch compilation via: >>> cmake . -DUSE_DOXYGEN=1 -DUSE_PYTHON=1 >>> make >>> >>> e) Check if everything looks ok: >>> make check >>> >>> I have tried a+b+d : it fails. >>> Only a+b and then (d+c or c+d) works. >>> >>> I believe there is something missing in acprep script. >>> >>> >>> Thierry >>> >>> PS : my first post since months, I had a motorcycle accident, my fault, >>> 4 fractures to pelvis bone, spent 3 months in hospital, almost no sequel, >>> lucky me. >>> >>> >>> On Monday, April 21, 2014 2:05:08 PM UTC+2, James Clemence wrote: >>>> >>>> On Ubuntu 14.04 x86_64, the build is failing. I've got the following >>>> dependencies installed: >>>> >>>> libboost1.55-dev libboost-regex1.55-dev libboost-date-time1.55-dev >>>> libboost-filesystem1.55-dev build-essential cmake texinfo python-dev >>>> zlib1g-dev libbz2-dev libgmp3-dev bjam gettext cvs libmpfr-dev >>>> >>>> However, build fails with the following issue: >>>> >>>> [ 3%] Building CXX object src/CMakeFiles/libledger.dir/stats.cc.o >>>> /home/jvc26/ledger/src/stats.cc:32:21: warning: >>>> /home/jvc26/ledger/system.hh.gch: not used because >>>> `__GNUC_GNU_INLINE__' not defined [-Winvalid-pch] >>>> #include <system.hh> >>>> ^ >>>> In file included from /home/jvc26/ledger/src/exprbase.h:57:0, >>>> from /home/jvc26/ledger/src/draft.h:45, >>>> from /home/jvc26/ledger/src/stats.cc:34: >>>> /home/jvc26/ledger/src/utils.h:488:12: error: ‘std::unique_ptr’ has >>>> not been declared >>>> using std::unique_ptr; >>>> ^ >>>> In file included from /home/jvc26/ledger/src/report.h:52:0, >>>> from /home/jvc26/ledger/src/stats.cc:38: >>>> /home/jvc26/ledger/src/session.h:62:3: error: ‘unique_ptr’ does not >>>> name a type >>>> unique_ptr<journal_t> journal; >>>> ^ >>>> /home/jvc26/ledger/src/stats.cc: In function ‘ledger::value_t >>>> ledger::report_statistics(ledger::call_scope_t&)’: >>>> /home/jvc26/ledger/src/stats.cc:49:31: error: ‘class >>>> ledger::session_t’ has no member named ‘journal’ >>>> statistics(report.session.journal->master->family_details(true)); >>>> ^ >>>> make[2]: *** [src/CMakeFiles/libledger.dir/stats.cc.o] Error 1 >>>> make[1]: *** [src/CMakeFiles/libledger.dir/all] Error 2 >>>> make: *** [all] Error 2 >>>> acprep: ERROR: Execution failed: make >>>> >>>> Any pointers? Thanks! >>>> >>> -- > > --- > You received this message because you are subscribed to the Google Groups > "Ledger" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- --- You received this message because you are subscribed to the Google Groups "Ledger" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
