Evert Van Dijken heeft het onderstaande bericht geplaatst in de Legacy groep
op Facebook:
Er is een nieuwe update beschikbaar voor Legacy
Door deze update worden de opties in 8.2 teruggezet naar de
standaardwaarden. Dus als iemand dat ooit heeft aangepast dan na de update
weer terugzetten naar de gewenste waarden.
Verder wordt er meteen na de update bij het starten van het programma een
controle van de bronnen gedaan (er wordt niets gewijzigd aan de bron zelf,
alleen wordt alles gekopieerd naar een extra kolom in de database zodat
FamilySearch deze bron ook kan gebruiken als een gebruiker besluit om deze
bron te kopiëren naar FamilySearch).
Natuurlijk ook veel bugfixes zoals de problemen met het Gezinsbladrapport.
Hieronder de tekst zoals die gepost is in de Engelstalige LUG
Legacy 9 Update 279
Yes, we have been promising another Legacy 9 update for days... It is here
now. Yes, it fixes the Error 62 problem with Family group Report. (I am sure
that many of you will be glad of that!)
It also fixes a number of other issues that you can see from the revision
history. I am not going to go into all of them as you can read that list,
and most are self explanatory.
What I do wish to share with you are a few very visible changes.
First, we discovered that we needed to check all of your source records as
we were finding that many users have records that are missing a field needed
by FamilySearch. It does not hurt your data, but it does make it difficult
to transfer sources properly to Legacy FamilySearch and other tools.
When you open your Family File for the first time with this update, you will
see a display where is says "Checking Sources" This may take a short while
if you have a lot of sources. Do not worry. This is not changing any of your
sources, but, after it is complete, your sources will now transfer
correctly.
Another major changes is that, in response to numerous requests, we have
done a major revision to how we handle the various IDs you see displayed
while running Legacy and that you add to reports. We have this project about
90% complete, but it is so much better that we did not want to hold up a new
update to resolve the last few issues as they are relatively minor. (Yes, I
anticipate some of you dinging us for anything missing; we do want to hear
from you to tell us if we are missing something you think we really need!)
Before you start working with this new update, we need you to open the
Customize tool and go to option 8.2 and set it up as you want numbers to
display in Legacy.
The Option 8.2 settings will now have no effect on any reports!
Option 8.2 has 2 sections:
"On Family, Pedigree, and Descendant Views"
and
"Show RINs on all Name Lists"
The first section, if checked, will allow you to display a RIN and/or one or
none of the "non-RIN IDs" after names in Family Viewm Pedigree View, and
Descendant View .
The non-RIN IDs are: AFN, User ID, FamilySearch ID, or FindaGrave ID.
RIN will be displayed in square brackets after a name, eg. John Smith [231].
The non-RIN ID will be displayed after a name as {L8SJ-WLR} in curly
brackets.
The second section, if checked, will add RINs to Name Lists. That, of
course, includes Search Lists and Share Event with lists. It will add them
to Marriage lists, Show Lists, Name Lists in Master Location List, etc. And
it is supposed to be smart enough to assure a RIN is not shown twice. IE,
Show Lists normally have a RIN column; we do not add a RIN to them.
The Relationship Calculator has its own RIN control and that works
independently now of Option 8.2. Similarly, Chronology View on its Display
Options Formatting tab now has an independent control to display BOTH RINs
and MRINs.
Reports
All reports now have their own independent controls to determine what IDs
will be shown. The number of IDs that a report will be able to display is
dependent on what we felt was necessary or feasible for the Report.
All Reports will have an option as part of its Report Options to display
RINs; many will also have MRINs; some will also allow you to select ONE of
the non-RIN IDs; and some will also allow you to select all of the non-RIN
IDs.
The display of the IDs will be done on a report with labels so it is clear
which ID is being displayed:
RIN: [nnn]
MRIN: [MRIN: nnn]
Non-RIN IDs:
AFN: {AFN: nnn}
User ID: {UsrID: nnn}
FamilySearch ID: {FSID: nnn}
FindaGrave ID: {FGID: nnn}
This is the design. I am sure you will find a few glitches as there are a
lot of tools to check and different user settings may give different
results.
(John Lisle)
Michele Simmons Lewis, CGR
Gr,
Irma
Irma Lommen Salden
<mailto:[email protected]> [email protected]
<http://www.limburgemigrant.nl/> www.limburgemigrant.nl
--
_______________________________________________
Legacy-Nederlands mailing list
[email protected]
http://legacyusers.com/mailman/listinfo/legacy-nederlands_legacyusers.com
