Hi TIM,looks like you have solved it for me without going out to the shed,I will do this t/mrrow.this forum is invaluable,MAC.
On Nov 3, 11:56 pm, "Tim Krause" <artmarb...@comcast.net> wrote: > One more thing, > > There's a pretty good tutorial on Legacy's > site:http://legacywoodworking.com/technique.cfm?techniqueID=2 > > Notice the diameter = pitch = width of cutter. > > Lil Twisted is a real know it all on this topic. Hopefully he will chime > in. > > -Tim > > ----- Original Message ----- > From: "Tim Krause" <artmarb...@comcast.net> > To: <legacy-ornamental-mills@googlegroups.com> > Sent: Tuesday, November 03, 2009 3:50 PM > Subject: Re: REVO > > > Hi Mac, > > > Can you take photos and show the problem? Are you starting from a round > > piece? My guess is the wrong pitch for the width of the router bit. Which > > router bit are you using, and how many starts? > > > -Tim > > > ----- Original Message ----- > > From: "MACSWAG" <davidcraig.dil...@virgin.net> > > To: "Legacy Ornamental Mills" <legacy-ornamental-mills@googlegroups.com> > > Sent: Tuesday, November 03, 2009 3:30 PM > > Subject: REVO > > > > Hi ppl, are there any Revo owners in the U.K.get in touch,exchange > > > some info's, to all on forum,When I make barley twist columns I seem > > > to be getting the round over part only on one side of the twist, > > > the other side is just flat,if I increase the depth I then get a cut > > > ridge > > > on the opposite side and a partial roundover on the flat side of the > > > curve,where am I going wrong here,any and all sugestions welcome, > > > > MAC. --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To post to this group, send email to legacy-ornamental-mills@googlegroups.com To unsubscribe from this group, send email to legacy-ornamental-mills+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/legacy-ornamental-mills -~----------~----~----~----~------~----~------~--~---