Hi Curt, I use the 120v version (kb-120) in a lot of my simple 90v setups. They are easy to find in the surplus world. KB Electronics has lot's of suitable controllers. They are easy to find used and new on ebay. They are simple to setup and documentation is freely available on the web.
-Tim ----- Original Message ----- From: Martinsbootfair To: [email protected] Sent: Saturday, February 23, 2013 4:22 AM Subject: Re: Motor drive for LOM Hi, with regards to a motor drive to fit to your Legacy mills I saw an interesting discussion on another forum which may be useful to this group. If you go to http://bedair.org/Tmotor/Tmotor2.html you will find what I think looks like a good low cost system. The guy, Steve, lists lots of links to source items for the project so for some of you this may be a good option. It's a bit beyond my capabilities at this point but very interesting. Hope you like the link. Martin -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en. For more options, visit https://groups.google.com/groups/opt_out. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en. For more options, visit https://groups.google.com/groups/opt_out.
