nice

On Wed, Aug 9, 2017 at 5:48 PM, Russ Veinot <ru...@yknotwood.com> wrote:

> My hat is off to you.  I always enjoy a good flat milling project.  Looks
> like that was fun to do.  Would have made a great youtube video:>)
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com [mailto:
> legacy-ornamental-mills@googlegroups.com] *On Behalf Of *Dexter Bland
> *Sent:* Tuesday, August 08, 2017 8:08 AM
> *To:* legacy-ornamental-mills
> *Subject:* Fwd: Vent cover
>
>
>
> This is a simple project I did last night. When you can't find what you
> need in the shape/size/type of wood, you make it yourself. I needed a air
> vent duct cover out of birch for a cabinet toe-kick and the Legacy made
> this project easy.
>
> Photo 1 -  First you have to find your machine. It is under there
> somewhere.
>
> Photo 2 - Make/attach work surface to the rails.
>
> Photo 3 - Use router bit to square up the board.
>
> Photo 4 - Use the Mike Pung crank method to equally space the cuts.
>
> Photo 5 - Round-over the edges and sand.
>
> Photo 6 - Dado the edges to fit in the vent hole.
>
> I did not cut the board thinner just in case the cover gets kicked or hit
> with a vacuum. It is not a sexy project, but maybe this will spur some idea
> of some common thing you can make out of wood.
>
>
>
> db
>
>
>
>
>
>
>
>
>
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To post to this group, send email to legacy-ornamental-mills@
> googlegroups.com.
> Visit this group at https://groups.google.com/
> group/legacy-ornamental-mills.
> For more options, visit https://groups.google.com/d/optout.
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To post to this group, send email to legacy-ornamental-mills@
> googlegroups.com.
> Visit this group at https://groups.google.com/
> group/legacy-ornamental-mills.
> For more options, visit https://groups.google.com/d/optout.
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Reply via email to