soooooo… driving home in my daily ritual of an hour and a half, parking lot crawl, thinking of this mod, of course... and it suddenly dawned on me that it would not be possible to "pump" the router cutting action AND follow a template... and that only straight, cylindrical work could be "pump" cut... that situation is basically a "MOD KILLER" for me!... I could still possibly put the pump cutting idea to use in making drapery poles, but I already have over a hundred designs that are currently not selling... so, from a "can I make some money" standpoint, this mod is not beneficial... but I did expect that before I started and thought some artistic outlet would emerge from the mod... but without the ability to follow a template and do shaped pieces, while pumping the cutting action, it just seems not worthwhile to proceed... or a re-thinking of the project is in order, but it must include the ability to follow a template... a few thoughts have come to me to solve the problem, but they are quite complex and I am not 100% sure they would work, or that they would have some quirks to them... this has taken the wind out of my sails, so to speak, as I was ready to proceed with this project... so I am back to the staring-into-space, thinking-of-a-solution mode... apologies to all for starting this without thinking it all the way through... if anyone has any ideas or suggestions they would be very welcome, so please comment and post away... and it's back to the drawing board!... Joe
>>>>>>>>> -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.