That’s a thought curt I’m over thinking the flip stop on the woodchuck just take the table nut off the flip stop bottom and g clamp the stop strait to the side of the steel rail easy just keep it low enough so the saddle can travel passed the clamp when the arm is up and when you flip it down the saddle hits it and you got it simple problem solved.
Bill From: 'Curt George' via Legacy Ornamental Mills [mailto:legacy-ornamental-mills@googlegroups.com] Sent: Tuesday, 18 December 2018 3:59 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: stops Legacy when they were Phantom. used wooden clamps for stops on the square rails. I would think a C clamp would work as well? Perhaps a cam type of clamp would work nicely. on the Wood Chuck. I would step out and say, Almost anything that Legacy has or can do , can be used in some way on the WC, You may need to make parts, but the concept of what is being done is the goal, the method may differ some, but the idea is what we are looking for. C.A.G. On Monday, December 17, 2018, 9:29:07 AM EST, Tim Ziegler <timjzieg...@gmail.com> wrote: Stop blocks look like they can really be a good asset to your Legacy. Brain storming how I could possibly add them to my predecessor the WC Kind regards, Tim of ZWW&S On Sunday, December 16, 2018 at 4:05:46 AM UTC-6, aussiman wrote: From: Bill Bulkeley [mailto:bulk...@mmnet.com.au] Sent: Sunday, 16 December 2018 8:56 PM To: legacy-orna...@ googlegroups.com Subject: stops Made some flip stops for my legacy today good for repeat work flip them down when you don’t want it flip em up when you do Saves moving stops for different operations on the same job set several and flip em up and down as you need them bought them on ebay and modified them for the legacy they are even the right colour :-) Bill -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. <http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient> Virus-free. <http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient> www.avg.com -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.