I'm so proud of you all pointing out the tiny detail, but no one pointed out that one machine is shorter than the other two.
The leg diagonals where added later in the production. It made the unit stiffer and less wobbly. The controller box in question is one from the 2000. Very strange to see it on such an early machine, but obviously all the machines were adapted to the newer z-axis kits. Now if we want to get even more specific, the z-axis kits are the second generation out of three that I'm aware of. I'm not near my date information, but is that really needed? Oh, finally none of them are CNC's or duplicators. That's really a clerical error. He said in the post that I read that he bought them at an auction and knew very little about them. At over $3000 for each unit is a bit of a stretch. I agree that very few people need three machines. I did have a thought that we are starting to see third generation buyers. People that saw the demos at the old woodworking shows, but they didn't buy them then. Pretty interesting to me, the farther removed from the original buyers, the more the machines are missing parts. Tim On Jul 28, 2019, 7:43 PM, at 7:43 PM, Tracy Smith <trlsmit...@gmail.com> wrote: >Here's a picture of the 1500 I had before I sold it. > >On Sun, Jul 28, 2019 at 6:21 PM MWF <mwfos...@earthlink.net> wrote: > >> Tracy, >> Did your 1500 have the "Floor Stand with Elevation Controls" option? >> (That's what Legacy called the two cranks w/acme thread rods to >> raise/lower the bed rails). >> I'm thinking that the knee braces may have been a component of that >> upgrade. >> Mac >> ------------------------------ >> >> -----Original Message----- >> From: Tracy Smith >> Sent: Jul 28, 2019 7:55 PM >> To: legacy-ornamental-mills@googlegroups.com >> Subject: Re: THREE LOM's as a lot on eBAy! >> >> I have a 1200 with the CNC upgrade and these three machines do not >have >> any of the components, that I can see, for the CNC upgrade. The red >box on >> the middle machine looks to be the motor control. It's very >different from >> the other two and something I have not seen on a LOM before. >> >> I use to have a 1500 and these look like they are a newer model than >the >> one I had. The knee braces on the legs, for example, are something >my >> previous 1500 did not have. >> >> Tracy >> >> On Sun, Jul 28, 2019 at 5:20 PM MWF <mwfos...@earthlink.net> wrote: >> >>> Joe, >>> I'm LMAO! >>> Send pics of it! LOL >>> Mac >>> ------------------------------ >>> >>> -----Original Message----- >>> >From: 'joe biunno' via Legacy Ornamental Mills >>> >Sent: Jul 28, 2019 6:40 PM >>> >To: Legacy Ornamental Mills >>> >Subject: THREE LOM's as a lot on eBAy! >>> > >>> >and a side note to Mac... my GPS says I should be there by >9:00PM!... >>> LOL!!!!!!! >>> >>> -- >> You received this message because you are subscribed to the Google >Groups >> "Legacy Ornamental Mills" group. >> To unsubscribe from this group and stop receiving emails from it, >send an >> email to legacy-ornamental-mills+unsubscr...@googlegroups.com. >> To view this discussion on the web visit >> >https://groups.google.com/d/msgid/legacy-ornamental-mills/1955455019.4415.1564359709676%40wamui-agami.atl.sa.earthlink.net >> ><https://groups.google.com/d/msgid/legacy-ornamental-mills/1955455019.4415.1564359709676%40wamui-agami.atl.sa.earthlink.net?utm_medium=email&utm_source=footer> >> . >> > >-- >You received this message because you are subscribed to the Google >Groups "Legacy Ornamental Mills" group. >To unsubscribe from this group and stop receiving emails from it, send >an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. >To view this discussion on the web visit >https://groups.google.com/d/msgid/legacy-ornamental-mills/CAPnmKgCgYp2gJLrZ09_NaU9jgBkCk0viQ_arsLmW6yhKYFzfuQ%40mail.gmail.com. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/d6133ed9-aa45-4e8b-9946-965e9118648d%40comcast.net.
