This article I wrote up a long time ago might help.
From: legacy-ornamental-mills@googlegroups.com <legacy-ornamental-mills@googlegroups.com> On Behalf Of The Viking Sent: Tuesday, March 31, 2020 11:09 AM To: Legacy Ornamental Mills <legacy-ornamental-mills@googlegroups.com> Subject: Head-stock Play Hello All, I haven't used my LOM 900 for a few months, so today I cleaned and lubed it up. As part of that effort, I noticed that the head-stock has a bit of play in and out along the X axis - about 75 thou. I'm curious if that is inherent in these machines or has mine developed too much slop. If the answer is too much, what do I do about it? Thanks very much in advance. Jon Erik -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com <mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> . To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/594bc3ec-c0bb-4779-af04-a27c90bf134c%40googlegroups.com <https://groups.google.com/d/msgid/legacy-ornamental-mills/594bc3ec-c0bb-4779-af04-a27c90bf134c%40googlegroups.com?utm_medium=email&utm_source=footer> . -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/013d01d60788%246ebdd690%244c3983b0%24%40comcast.net.
