they should be straight. Did you remove them and then re-insert them? Sounds like they could have cross threaded at an angle but you'd notice that when you screwed them in on the first screw I'd think?
Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Fri, Apr 30, 2021 at 11:58 PM Brett Giger <brettgiger1...@gmail.com> wrote: > Hey Tim it's Brett stupid question of the day I got my big Porter-Cable > router the holes are pre-drilled in the plate is the router supposed to be > straight or kick sideways a little bit? Cuz the way the holes line up my > router's kicked sideways all the videos I've been watching looks like > they're straight > > On Fri, Apr 30, 2021, 3:48 AM Tim Ziegler <timjzieg...@gmail.com> wrote: > >> Hey Curt, >> >> Not sure who might chime in on that one but I;m pretty sure I have them, >> you'll just have >> to tell me what I'm checking. >> Kind Regards, >> >> Timothy J. Ziegler >> Ziegler WoodWork & Specialty >> 14171 160th Ave. >> Foreston MN 56330 >> >> 320-294-5798 shop >> 320-630-2243 cell >> >> >> On Fri, Apr 30, 2021 at 12:09 AM 'Curt George' via Legacy Ornamental >> Mills <legacy-ornamental-mills@googlegroups.com> wrote: >> >>> Hello Everyone. >>> Thank you Bill, for posting the X 4 gear set. >>> >>> Anthony If I remember you original question was about achieving a pitch >>> that you could not get with your standard gear set. >>> >>> >>> >>> The easiest way to control the rotation speed (or pitch here.) would to >>> be to make a duplex gear, the outer part moves fast and the smaller one >>> would move slower, because of the axis of both gears would be the same. >>> >>> Here is an idea for you. Legacy when they were Phantom. made a .5 gear >>> set for there Wood Chuck machines. >>> It might be easer to ask one of our group members who own this gear set, >>> to let you know the sizes of those gear set, then you can copy the sizes of >>> the gears to make your own set? there is no reason why you need to >>> re-invent the wheel. >>> >>> I wish you luck on this. >>> >>> talk to you more latter. >>> >>> C.A.G. >>> >>> On Thursday, April 29, 2021, 07:48:31 PM EDT, <bulke...@mmnet.com.au> >>> wrote: >>> >>> >>> Ps that A- gear of yours (yes good name lol) if it works for the 21/4 >>> inch pitch for your balusters >>> Used with the.25 reduction gears I wonder if you will get a 5/8 pitch >>> very interesting. >>> >>> Bill >>> >>> -----Original Message----- >>> From: legacy-ornamental-mills@googlegroups.com < >>> legacy-ornamental-mills@googlegroups.com> On Behalf Of >>> bulke...@mmnet.com.au >>> Sent: Friday, 30 April 2021 9:23 AM >>> To: legacy-ornamental-mills@googlegroups.com >>> Subject: RE: Gears >>> >>> Yes I remember that now it looks like you may have solved your problem >>> are you going to make the gear yourself or have it laser cut somewhere? as >>> I think I said before with lots of patience and a scroll saw you can cut >>> your own if your desperate I did when I made a 112 tooth pitch gear and a >>> 15 tooth index gear and even duplex gears when I was chasing very fine >>> pitches on the legacy >>> >>> Bill >>> >>> -----Original Message----- >>> From: legacy-ornamental-mills@googlegroups.com < >>> legacy-ornamental-mills@googlegroups.com> On Behalf Of anthony >>> Sent: Friday, 30 April 2021 3:08 AM >>> To: legacy-ornamental-mills@googlegroups.com >>> Subject: Re: Gears >>> >>> I thought my notation of "A-" (Read as A minus.) was a clever notation; >>> a quarter of the distance from"A" towards "B." >>> The gear I am making has 82 teeth and an appropriate change in diameter >>> of the gear. >>> The A gear has 90 teeth and the B gear has 60 teeth with appropriate >>> changes in the diameters of the gears. I measured all of the "drive" >>> gears, and the ratios are all consistent through the series. >>> >>> And to the question, I am making a reproduction of some balusters in an >>> old house. It is the original problem I came seeking help on three months >>> or so ago when I joined the group. >>> >>> anthony >>> >>> To forgive is to set a prisoner free and discover that the prisoner was >>> you. >>> . >>> -----Original Message----- >>> From: bulke...@mmnet.com.au >>> Sent: Thursday, April 29, 2021 11:52 AM >>> To: legacy-ornamental-mills@googlegroups.com >>> Subject: RE: Gears >>> >>> In-between A and B gear that’s interesting are you making it for a >>> particular project? >>> >>> Bill >>> >>> -----Original Message----- >>> From: legacy-ornamental-mills@googlegroups.com >>> <legacy-ornamental-mills@googlegroups.com> On Behalf Of anthony >>> Sent: Thursday, 29 April 2021 1:28 AM >>> To: legacy-ornamental-mills@googlegroups.com >>> Subject: Re: Gears >>> >>> I am making a gear between the "A" and "B" gear. >>> 88 mm in diameter with 82 teeth. >>> I don't have easy access to the mill, I was just looking to finish the >>> drawing before making the journey. >>> anthony >>> >>> To forgive is to set a prisoner free and discover that the prisoner was >>> you. >>> . >>> -----Original Message----- >>> From: bulke...@mmnet.com.au >>> Sent: Wednesday, April 28, 2021 1:41 AM >>> To: legacy-ornamental-mills@googlegroups.com >>> Subject: RE: Gears >>> >>> Without going out to the shop and mic the square on the leadscrew I cant >>> tell you that can you measure the shaft on your mill? >>> So your making drawings of the duplex gear? If so what about the index >>> gear? >>> >>> Bill >>> >>> -----Original Message----- >>> From: legacy-ornamental-mills@googlegroups.com >>> <legacy-ornamental-mills@googlegroups.com> On Behalf Of anthony >>> Sent: Wednesday, 28 April 2021 3:26 PM >>> To: Legacy ornamental mills <legacy-ornamental-mills@googlegroups.com> >>> Subject: Fw: Gears >>> >>> I am in the process of finishing up a CAD drawing to make a 2.25" pitch >>> gear of the type that goes with the right-hand side of the attached file. >>> According to my calipers (Not battery driven.), that square hole in the >>> middle of the gear reads as just less than 7/32" on a side. I can't >>> believe that something that odd was intended. >>> So, the question is, what is the actual dimension of the shaft that the >>> gear fits on? >>> anthony >>> >>> >>> To forgive is to set a prisoner free and discover that the prisoner was >>> you. >>> . >>> -----Original Message----- >>> From: 'Curt George' via Legacy Ornamental Mills >>> Sent: Sunday, March 07, 2021 8:31 PM >>> To: legacy-ornamental-mills@googlegroups.com >>> Subject: Re: Gears >>> >>> >>> >>> Hello Arkady >>> >>> I will have to go out and take some pictures of it latter. >>> These photos are the only ones that I have on file at this time. >>> You can see there is a square nut wielded to washer, the gears go over >>> and onto the square shaft making a small duplex gear that I can place in >>> the Legacy's gear linkage. (My set-up goes into the gear set up where the >>> directional gear set would normally go.) >>> >>> I also have fully photo's of Joe's set up. >>> C.A.G. >>> >>> On Sunday, March 7, 2021, 04:15:34 PM EST, Arkady Paka < >>> arkadyp...@gmail.com> wrote: >>> >>> >>> Thank you Curt. Can I see any blueprint and/or photo of your 234 gear >>> set? >>> >>> >>> вс, 7 мар. 2021 г., 15:52 'Curt George' via Legacy Ornamental Mills >>> <legacy-ornamental-mills@googlegroups.com>: >>> >>> >>> Hello Arkady >>> >>> NO ! I'm pretty sure that they will not match up to the Legacy's gears. >>> >>> What I am suggesting is to make a duplex gear form one of the Legacy's >>> gears and combine the two into one gear set that can be used on the Legacy. >>> As a matter of fact. Legacy did this, when they switched making there >>> gear, from machined to laser cut. (big teeth vs the small ones.) >>> >>> A few years ago I made my X-2,3,4 gear set. I made a square shaft ,and a >>> mounting plate. on this, I used a 96 tooth gear as the large gear. and then >>> I could put any one of three gears onto the square shaft it to make the >>> gear ratio that I needed. (4x is 24/96, X3 is 32/96, X2 is 48/96) This gear >>> set can be used in conjunction with the other Legacy gears, So if I need a >>> gear setting, I can go to the graph, and look up the pitch, and then >>> multiply that number X what ever I need, to make the pitch I want. >>> >>> Now these gear I am suggesting here are not the same as I had cut. but >>> they are also cheaper to buy. With a little work, (Most of what I did was >>> made with the use of a file and a few tack wields), You could make your own >>> gear sets, to make what ever pitches you want. >>> >>> A few year back we had a member make there own gear sets >>> https://groups.google.com/g/legacy-ornamental-mills/c/NRI4-q17xz8/m/qz4wSch25-sJ >>> Joe made his own sets, It looks a little crazy but it worked well. As a >>> matter of Fact. Bill also used chain and gears to make different pitches on >>> this same link. >>> >>> When there is a Will! there is always a Way to make the job get done. >>> >>> "Legacy where the only limitation, is your imagination" >>> >>> C.A.G. >>> >>> On Sunday, March 7, 2021, 06:37:42 AM EST, Arkady Paka < >>> arkadyp...@gmail.com> wrote: >>> >>> >>> Hi Curt. Are you sure these gears match Legacy gears? >>> >>> Arkady from Ukraine. >>> >>> >>> вс, 7 мар. 2021 г. в 09:07, <bulke...@mmnet.com.au>: >>> >>> >>> Well an 80 and a 40 tooth gears are a 2 to 1 ratio there is 2 X gears >>> right >>> there >>> >>> >>> >>> Nice find curt >>> >>> >>> >>> From: 'Curt George' via Legacy Ornamental Mills >>> <legacy-ornamental-mills@googlegroups.com> >>> Sent: Sunday, 7 March 2021 4:05 PM >>> To: Legacy ornamental mills <legacy-ornamental-mills@googlegroups.com> >>> Subject: Gears >>> >>> >>> >>> >>> >>> >>> >>> >>> https://www.amazon.com/VEVOR-Precise-Replacement-Milling-Machines/dp/B08QHHFQ86/ref=sr_1_250?dchild=1&keywords=milling+machine&qid=1615092585&sr=8-250 >>> >>> >>> >>> >>> >>> >>> >>> Hello Everyone. I don't know how many of you will like this idea. >>> >>> >>> >>> These gears, although will not mate up the Legacy's gears directly, >>> could be >>> used to make a set of Duplex gear sets, that then could be used on the >>> Legacy to adjust the gear pitches. >>> >>> >>> >>> For the price I think this may be a idea people here might like to think >>> about? >>> >>> >>> >>> >>> Amazon has a number of different sets ranging form $53-$78.00 >>> >>> >>> >>> >>> >>> >>> >>> C.A.G. >>> >>> >>> >>> -- >>> You received this message because you are subscribed to the Google >>> Groups >>> "Legacy Ornamental Mills" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an >>> email to legacy-ornamental-mills+unsubscr...@googlegroups.com. >>> To view this discussion on the web visit >>> >>> https://groups.google.com/d/msgid/legacy-ornamental-mills/621371438.823421.1615093488580%40mail.yahoo.com >>> . >>> >>> >>> >>> >>> >>> -- >>> You received this message because you are subscribed to the Google Groups >>> "Legacy Ornamental Mills" group. >>> To unsubscribe from this group and stop receiving emails from it, send an >>> email to legacy-ornamental-mills+unsubscr...@googlegroups.com. >>> To view this discussion on the web visit >>> >>> https://groups.google.com/d/msgid/legacy-ornamental-mills/000201d71320%2457dde4c0%240799ae40%24%40mmnet.com.au >>> . >>> >>> >>> >>> >>> -- >>> You received this message because you are subscribed to the Google Groups >>> "Legacy Ornamental Mills" group. >>> To unsubscribe from this group and stop receiving emails from it, send an >>> email to legacy-ornamental-mills+unsubscr...@googlegroups.com. >>> To view this discussion on the web visit >>> >>> https://groups.google.com/d/msgid/legacy-ornamental-mills/CANzkk5-LQDyHCbDQiRezNp4CitrqprQZ5_c0q9m1gTXkS0twCg%40mail.gmail.com >>> . >>> >>> >>> >>> -- >>> You received this message because you are subscribed to the Google Groups >>> "Legacy Ornamental Mills" group. >>> To unsubscribe from this group and stop receiving emails from it, send an >>> email to legacy-ornamental-mills+unsubscr...@googlegroups.com. >>> To view this discussion on the web visit >>> >>> https://groups.google.com/d/msgid/legacy-ornamental-mills/900408239.846176.1615125155527%40mail.yahoo.com >>> . >>> >>> >>> >>> >>> -- >>> You received this message because you are subscribed to the Google Groups >>> "Legacy Ornamental Mills" group. >>> To unsubscribe from this group and stop receiving emails from it, send an >>> email to legacy-ornamental-mills+unsubscr...@googlegroups.com. >>> To view this discussion on the web visit >>> >>> https://groups.google.com/d/msgid/legacy-ornamental-mills/CANzkk59C1_5xseuR-m%3Dc-MfwOaecQ-RX1yKL-uPYRj1RhUGpxA%40mail.gmail.com >>> . >>> >>> >>> >>> -- >>> You received this message because you are subscribed to the Google Groups >>> "Legacy Ornamental Mills" group. >>> To unsubscribe from this group and stop receiving emails from it, send an >>> email to legacy-ornamental-mills+unsubscr...@googlegroups.com. >>> To view this discussion on the web visit >>> >>> https://groups.google.com/d/msgid/legacy-ornamental-mills/1839494736.1034392.1615170693002%40mail.yahoo.com >>> . >>> >>> -- >>> You received this message because you are subscribed to the Google Groups >>> "Legacy Ornamental Mills" group. >>> To unsubscribe from this group and stop receiving emails from it, send an >>> email to legacy-ornamental-mills+unsubscr...@googlegroups.com. >>> To view this discussion on the web visit >>> >>> https://groups.google.com/d/msgid/legacy-ornamental-mills/56ADED6721DA43FDBE092439CD93A7DF%40acmePC >>> . >>> >>> -- >>> You received this message because you are subscribed to the Google Groups >>> "Legacy Ornamental Mills" group. >>> To unsubscribe from this group and stop receiving emails from it, send an >>> email to legacy-ornamental-mills+unsubscr...@googlegroups.com. >>> To view this discussion on the web visit >>> >>> https://groups.google.com/d/msgid/legacy-ornamental-mills/000001d73bf9%249f804c80%24de80e580%24%40mmnet.com.au >>> . >>> >>> -- >>> You received this message because you are subscribed to the Google >>> Groups >>> "Legacy Ornamental Mills" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an >>> email to legacy-ornamental-mills+unsubscr...@googlegroups.com. >>> To view this discussion on the web visit >>> >>> https://groups.google.com/d/msgid/legacy-ornamental-mills/942DE76BF8A24DC987E7CE893DDC9CF9%40acmePC >>> . >>> >>> -- >>> You received this message because you are subscribed to the Google >>> Groups >>> "Legacy Ornamental Mills" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an >>> email to legacy-ornamental-mills+unsubscr...@googlegroups.com. >>> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/legacy-ornamental-mills/000501d73d18%2403090070%24091b0150%24%40mmnet.com.au. >>> >>> >>> -- >>> You received this message because you are subscribed to the Google >>> Groups "Legacy Ornamental Mills" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. >>> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/legacy-ornamental-mills/C4D78F6324E74571B549E1FB976A9041%40acmePC >>> . >>> >>> -- >>> You received this message because you are subscribed to the Google >>> Groups "Legacy Ornamental Mills" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. >>> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/legacy-ornamental-mills/000001d73d4e%24a9244970%24fb6cdc50%24%40mmnet.com.au >>> . >>> >>> >>> -- >>> You received this message because you are subscribed to the Google >>> Groups "Legacy Ornamental Mills" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. >>> >>> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/legacy-ornamental-mills/000801d73d52%2424aeff60%246e0cfe20%24%40mmnet.com.au >>> . >>> >>> -- >>> You received this message because you are subscribed to the Google >>> Groups "Legacy Ornamental Mills" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. >>> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/legacy-ornamental-mills/1639443003.1319484.1619759359711%40mail.yahoo.com >>> <https://groups.google.com/d/msgid/legacy-ornamental-mills/1639443003.1319484.1619759359711%40mail.yahoo.com?utm_medium=email&utm_source=footer> >>> . >>> >> -- >> You received this message because you are subscribed to the Google Groups >> "Legacy Ornamental Mills" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to legacy-ornamental-mills+unsubscr...@googlegroups.com. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLE2Lws3Od2zrmdYKop-wp-A6U1OKpQmHtH3Prf29vxokw%40mail.gmail.com >> <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLE2Lws3Od2zrmdYKop-wp-A6U1OKpQmHtH3Prf29vxokw%40mail.gmail.com?utm_medium=email&utm_source=footer> >> . >> > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/CAHoUWTvid5cWEh0YmnGykV0guAKjdy7nWZ3A5oCrds4ADyQYvA%40mail.gmail.com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAHoUWTvid5cWEh0YmnGykV0guAKjdy7nWZ3A5oCrds4ADyQYvA%40mail.gmail.com?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHo0k3Ux7L%2BJ5xAQQPzVnHyH3d_xq%2BpoV0e-Z0WE2-JMQ%40mail.gmail.com.
